3D-Pioneer.com
3D-Pioneer.com

اعثر على أفضل طابعة ثلاثية الأبعاد بأفضل سعر - المواصفات مقابل السعر، بدون ضجيج تسويقي.

Best resin 3D printers under €350

Updated 6 September 2026 · Live prices on every page load from Amazon.fr

Ranked off live Amazon.fr prices plus the specs that actually matter on a resin machine: XY pixel size (finer is better), build volume, and light-source technology. Bigger numbers don't always mean better prints - but they do mean more headroom for miniatures, dental work and jewellery casting. Resin is messier than FDM; expect to spend time on wash, cure and nitrile gloves.

  1. #1
    Elegoo Mars 5 Ultra Imprimante 3D Résine MSLA 9K
    Elegoo
    Mars 5 Ultra Imprimante 3D Résine MSLA 9K
    €320 MSLA · 18 µm XY · 2.0 L · 8520 x 4320
  2. #2
    Elegoo Saturn 3 Imprimante 3D Résine MSLA avec Éc
    Elegoo
    Saturn 3 Imprimante 3D Résine MSLA avec Éc
    €350 MSLA · 19 µm XY · 6.7 L · 11520x5120
  3. #3
    MALYAN Mini imprimante 3D en résine S100 avec écr
    MALYAN
    Mini imprimante 3D en résine S100 avec écr
    €160 SLA · 12 µm XY · 0.1 L
  4. #4
    Elegoo Mars 5 Imprimante 3D Résine 4K MSLA LCD
    Elegoo
    Mars 5 Imprimante 3D Résine 4K MSLA LCD
    €220 MSLA · 35 µm XY · 1.9 L · 4K (6.6-inch LCD)
  5. #5
    Anycubic Photon Mono 4 Imprimante 3D Grande Taille
    Anycubic
    Photon Mono 4 Imprimante 3D Grande Taille
    €210 SLA · 2.2 L · 9024x5120

Matt's take on this budget

€350 is where 8K resin becomes standard and build areas start creeping towards Mars / Photon D2 size. If you're printing minis at 28 mm scale for tabletop, this is the tier where pixel size stops being a limitation. It's still not a workshop machine - the small bed makes big single prints awkward, and the lack of heating means winter print failures. A fantastic dedicated miniatures machine.

Frequently asked

What is the best resin 3D printer under €350? +

The shortlist above is live from Amazon. At this tier expect Elegoo Saturn 3/4, Anycubic Photon Mono M5s Pro and Phrozen Sonic Mini 8K to trade top slots as prices move. All are 8K-class machines with similar capability.

Is 8K resolution worth the upgrade over 4K? +

Yes for minis and jewellery, marginal for hand-sized props. Pixel size drops from ~35 µm (4K) to ~22 µm (8K) on typical screens - a visible step change on fine detail, less obvious on larger volumes.

How big are the prints at this budget? +

Typical build volumes at €350 are 218 x 123 x 230 mm or similar. Big enough for a handful of army minis or one medium bust. Larger-bed machines (Saturn 4 Ultra class) usually need closer to the €580 tier.

Other resin budgets
Resin under €230 Resin under €580 Resin under €1150 Resin under €2300
Or switch to FDM: Best FDM under €350 →

Related reading

Long readFDM vs resin 3D printingWhen each process wins, where each fails, and why most beginners should start with FDM.Read →Long readHow to pick your first 3D printerSpec by spec, what actually matters on a first printer and what the marketing hopes you will not question.Read →

Ranking is driven by the spec sheet plus live price. Print quality on resin also depends heavily on the slicer, the resin itself, exposure tuning and post-processing - none of which are on the spec sheet. Treat this as a shortlist, read owner reports, then buy.