Kobra 3 Max 3D-Drucker und 3D-Druckerkamera
Updated 16 October 2026 · Live prices updated daily
Buy on Amazon.de - €440.54 →Affiliate link. Price live from the marketplace, not cached.
At a glance
What this printer gets right and wrong
- ✓ 300°C hot end - handles carbon-fibre nylons and PC, not just the easy stuff.
- ✓ 88.2 L build volume - room for helmets, large functional parts, bulk runs.
- ! Bedslinger design - expect ringing artefacts on tall prints at speed.
- ! Open frame - PLA and PETG only, realistically. Forget ABS or nylon done properly.
Head-to-head spec + price table against the ANYCUBIC Kobra 3 Max 3D-Drucker und 3D-Druckerkamera. Verified printers on this marketplace only.
Sensible first-printer territory: priced where you can afford to get it wrong, with auto-levelling so the first layer isn't a ritual. You'll outgrow it in 18 months, which is fine.
Bedslinger with middling flow rate - you already have one of these. The whole point of upgrading is speed, rigidity, or print quality that your current machine can't hit. This doesn't clear that bar.
No active heated chamber or a hot end that tops out below 280°C means no reliable ABS, ASA, nylon or PC. Fine for a hobbyist, wrong tool for commercial work in engineering materials.
Verdicts are rule-driven from the spec sheet and current price (€441). They don't capture firmware polish, support quality, or reliability - so treat them as a sanity check, not a final answer.
Live offers
Every live listing on the English-language Amazon marketplaces that I've matched to this printer. Cheapest first. Affiliate links.
- 🇩🇪 Anycubic Kobra 3 Max 3D-Drucker und 3D-Druckerkamera BundleAmazon.de · New€440.54View
- 🇪🇸 ANYCUBIC Kobra 3 MAX Impresora 3D 420*420*500mm Gran Volumen ConstrucciónAmazon.es · New€445.99View
- 🇩🇪 Anycubic 4KG PLA Filament und Kobra 3 Max 3D Drucker BundleAmazon.de · New€464.30View
- 🇩🇪 Anycubic Kobra 3 Max 3D-Drucker und 4KG PLA Filament BundleAmazon.de · New€464.30View
- 🇩🇪 Anycubic Kobra 3 Max 3D-Drucker und 4KG PLA Filament BundleAmazon.de · New€472.22View
- 🇩🇪 Anycubic Kobra 3 Max Combo 3D-Drucker Mehrfarbig, Trocknung Filament während des DrucksAmazon.de · New€509.00View
- 🇪🇸 Anycubic Kobra 3 MAX Combo Impresora 3D Inteligente Multicolor ImpresiónAmazon.es · New€549.00View
- 🇺🇸 （Bundle 8 Colors） Anycubic Kobra 3 Max Combo 3D Printer, 8 Stunning Multicolor with 2 Anycubic ACE PRO, Large Build Volume 420x420x500mm 600mm/s High-Speed PreciseAmazon.com · New$752.37View
- 🇵🇱 Anycubic Kobra 3 Max Combo drukarka 3D, wielokolorowa, suszenie filamentuAmazon.pl · Newzł2970.00View
Close alternatives - what €441 gets you elsewhere
Think of this like the shopping-cart upsell: here's what a tenner more or less could buy you in roughly the same category. Same FDM tech, same marketplace, all prices live. Stretches are data-driven; they're not sponsored placements.
Save the money, similar specs on paper. You'd give up: 88.2 L vs 20.3 L build volume.
Get: CoreXY motion - faster, more rigid.
Get: 320°C hot end (was 300°C) · CoreXY motion - faster, more rigid.
Frequently asked
What materials can the ANYCUBIC Kobra 3 Max 3D-Drucker und 3D-Druckerkamera print? +
At €441 the ANYCUBIC Kobra 3 Max 3D-Drucker und 3D-Druckerkamera has the hot end for engineering materials (300°C) but no active chamber, so ABS and nylon will warp on anything larger than a phone case. Treat it as a PLA/PETG/TPU workhorse with headroom for the occasional small ABS part.
How fast is the ANYCUBIC Kobra 3 Max 3D-Drucker und 3D-Druckerkamera? +
Advertised at 600 mm/s, but that is motion-system capability, not what the hot end can sustain. Expect real-world prints at 80-150 mm/s without quality collapse.
How big can I print on the ANYCUBIC Kobra 3 Max 3D-Drucker und 3D-Druckerkamera? +
420×420×500 mm (88.2 L). Big enough for helmets in one piece, full-scale cosplay props, or multiple medium parts in one run. Reliability starts mattering at this scale - a failed 20-hour print stings.
Does the ANYCUBIC Kobra 3 Max 3D-Drucker und 3D-Druckerkamera have auto-levelling? +
Yes - LeviQ 3.0 auto-levelling probe. Not quite as clean as load-cell or LiDAR, but reliable once calibrated and a world better than manual paper-under-the-nozzle.
Is the ANYCUBIC Kobra 3 Max 3D-Drucker und 3D-Druckerkamera worth €441? +
€441 is the sweet spot tier. The ANYCUBIC Kobra 3 Max 3D-Drucker und 3D-Druckerkamera competes directly with the current Bambu A1, Creality K1 and Prusa Mini generation. Hardware-per-pound is tight here - the differentiator is usually software polish and ecosystem.
