Officiell CR Touch automatisk bäddnivelleringssens
Updated 26 September 2026 · Live prices updated daily
Buy on Amazon.se - kr604.86 →Affiliate link. Price live from the marketplace, not cached.
At a glance
What this printer gets right and wrong
Nothing jumps out on the spec sheet as a standout feature at this price.
- ! Open frame - PLA and PETG only, realistically. Forget ABS or nylon done properly.
- ! Manual levelling - plan a weekend of paper-under-the-nozzle rituals before your first clean first layer.
Head-to-head spec + price table against the Creality Officiell CR Touch automatisk bäddnivelleringssens. Verified printers on this marketplace only.
At this price you're well past the sweet spot for a first printer. There's no shame in starting with something cheaper - you'll learn more on a 200-400 machine and have money left for filament.
Bedslinger with middling flow rate - you already have one of these. The whole point of upgrading is speed, rigidity, or print quality that your current machine can't hit. This doesn't clear that bar.
No active heated chamber or a hot end that tops out below 280°C means no reliable ABS, ASA, nylon or PC. Fine for a hobbyist, wrong tool for commercial work in engineering materials.
Verdicts are rule-driven from the spec sheet and current price (kr605). They don't capture firmware polish, support quality, or reliability - so treat them as a sanity check, not a final answer.
Live offers
Every live listing on the English-language Amazon marketplaces that I've matched to this printer. Cheapest first. Affiliate links.
- 🇸🇪 Creality Officiell CR Touch automatisk bäddnivelleringssensor, 5 st 3D-skrivarmunstycken, sats för Ender 3/Ender 3 V2/Ender 3 Pro/Ender 5/CR-10 3D-skrivare med 32-bitars V4.2.2/V4.2.7-moderkortAmazon.se · Newkr604.86View
Close alternatives - what $605 gets you elsewhere
Think of this like the shopping-cart upsell: here's what a tenner more or less could buy you in roughly the same category. Same FDM tech, same marketplace, all prices live. Stretches are data-driven; they're not sponsored placements.
Save the money, same build volume at 16.8 L. You'd give up: nothing obvious on the spec sheet.
Get: 6.6 L more build volume (18.7 L) · 370°C hot end (was —°C).
Get: 14.9 L more build volume (27.0 L) · 300°C hot end (was —°C).
Frequently asked
What materials can the Creality Officiell CR Touch automatisk bäddnivelleringssens print? +
At kr605 the Creality Officiell CR Touch automatisk bäddnivelleringssens realistically prints PLA and TPU. The listed°C hot end is too tight for PETG with confidence and rules out ABS/nylon entirely.
How fast is the Creality Officiell CR Touch automatisk bäddnivelleringssens? +
Advertised at 200 mm/s, but that is motion-system capability, not what the hot end can sustain. Expect real-world prints at 80-150 mm/s without quality collapse.
How big can I print on the Creality Officiell CR Touch automatisk bäddnivelleringssens? +
220×220×250 mm (12.1 L). Comfortable for medium props, functional parts up to ~25 cm, and batch printing. One of the most-used working sizes in hobby 3D printing.
Does the Creality Officiell CR Touch automatisk bäddnivelleringssens have auto-levelling? +
No - manual levelling only. Plan a weekend tuning the bed with a piece of paper and a hex key before your first clean first layer. At this price in 2026, that is a real drawback.
Is the Creality Officiell CR Touch automatisk bäddnivelleringssens worth kr605? +
kr605 is serious hobbyist territory. For the Creality Officiell CR Touch automatisk bäddnivelleringssens to justify this over a $500 machine it needs to deliver genuine speed (volumetric flow), reliability at speed, or access to engineering materials. Check the spec table above against those three.
