Ender 3 V3 SE 250mm/s CR Touch Auto Leveling FDM
Updated 7 November 2026 · Live prices updated daily
Buy on Amazon.co.uk - £136.24 →Affiliate link. Price live from the marketplace, not cached.
At a glance
What this printer gets right and wrong
- ✓ Under £300 - low-risk way to get into 3D printing without regretting the spend.
- ! Open frame - PLA and PETG only, realistically. Forget ABS or nylon done properly.
Head-to-head spec + price table against the Creality Ender 3 V3 SE 250mm/s CR Touch Auto Leveling FDM. Verified printers on this marketplace only.
Sensible first-printer territory: priced where you can afford to get it wrong, with auto-levelling so the first layer isn't a ritual. You'll outgrow it in 18 months, which is fine.
Bedslinger with middling flow rate - you already have one of these. The whole point of upgrading is speed, rigidity, or print quality that your current machine can't hit. This doesn't clear that bar.
No active heated chamber or a hot end that tops out below 280°C means no reliable ABS, ASA, nylon or PC. Fine for a hobbyist, wrong tool for commercial work in engineering materials.
Verdicts are rule-driven from the spec sheet and current price (£136). They don't capture firmware polish, support quality, or reliability - so treat them as a sanity check, not a final answer.
Live offers
Every live listing on the English-language Amazon marketplaces that I've matched to this printer. Cheapest first. Affiliate links.
- 🇬🇧 Creality Ender 3 V3 SE 3D Printer 250mm/s CR Touch Auto Leveling FDM 3D Printers with Sprite Direct Extruder, Dual Z-axis & Y-axis Auto-Load Filament, Upgraded Ender 3, Print Size 8.66x8.66x9.84 inchAmazon.co.uk · Used£136.24View
- 🇬🇧 Creality Ender 3 V3 SE 3D Printer 250mm/s CR Touch Auto Leveling FDM 3D Printers with Sprite Direct Extruder, Dual Z-axis & Y-axis Auto-Load Filament, Upgraded Ender 3, Print Size 8.66x8.66x9.84 inchAmazon.co.uk · New£149.00View
- 🇬🇧 Creality Ender 3 V3 SE 3D Printer with Auto Leveling CR Touch, Sprite Direct Extruder, Self-Charging Filament, Dual Z Axis and Y Axis, 22x22x25cmAmazon.co.uk · New£406.03View
Close alternatives - what £136 gets you elsewhere
Think of this like the shopping-cart upsell: here's what a tenner more or less could buy you in roughly the same category. Same FDM tech, same marketplace, all prices live. Stretches are data-driven; they're not sponsored placements.
Get: 300°C hot end (was 260°C).
Get: 300°C hot end (was 260°C) · CoreXY motion - faster, more rigid.
Modest upgrade on the spec sheet.
Frequently asked
What materials can the Creality Ender 3 V3 SE 250mm/s CR Touch Auto Leveling FDM print? +
At £136 the Creality Ender 3 V3 SE 250mm/s CR Touch Auto Leveling FDM is a PLA, PETG, TPU machine. The 260°C hot end covers PETG with a small safety margin. ABS and nylon need an enclosure plus more heat - not this printer.
How fast is the Creality Ender 3 V3 SE 250mm/s CR Touch Auto Leveling FDM? +
Advertised at 250 mm/s, but that is motion-system capability, not what the hot end can sustain. Expect real-world prints at 80-150 mm/s without quality collapse.
How big can I print on the Creality Ender 3 V3 SE 250mm/s CR Touch Auto Leveling FDM? +
220×220×250 mm (12.1 L). Comfortable for medium props, functional parts up to ~25 cm, and batch printing. One of the most-used working sizes in hobby 3D printing.
Does the Creality Ender 3 V3 SE 250mm/s CR Touch Auto Leveling FDM have auto-levelling? +
Yes - CRTouch auto-levelling probe. Not quite as clean as load-cell or LiDAR, but reliable once calibrated and a world better than manual paper-under-the-nozzle.
Is the Creality Ender 3 V3 SE 250mm/s CR Touch Auto Leveling FDM worth £136? +
At £136 the Creality Ender 3 V3 SE 250mm/s CR Touch Auto Leveling FDM is in hobby-entry territory - low-risk way to try the hobby. Expect older motion systems and basic feature sets, but print quality will surprise people coming from five-year-old reviews.
