Imprimante 3D Creality Ender 5 Plus
Updated 26 September 2026 · Live prices updated daily
Buy on Amazon.fr - €814.90 →Affiliate link. Price live from the marketplace, not cached.
At a glance
What this printer gets right and wrong
- ✓ CoreXY motion system - faster and more rigid than a bedslinger, especially on tall prints.
- ✓ 49.0 L build volume - room for helmets, large functional parts, bulk runs.
- ! Open frame - PLA and PETG only, realistically. Forget ABS or nylon done properly.
Head-to-head spec + price table against the Creality Imprimante 3D Creality Ender 5 Plus. Verified printers on this marketplace only.
At this price you're well past the sweet spot for a first printer. There's no shame in starting with something cheaper - you'll learn more on a 200-400 machine and have money left for filament.
This is the kind of move that makes you wonder why you put up with your old machine for so long. Faster, more rigid, and the first layer stops being a gamble.
No active heated chamber or a hot end that tops out below 280°C means no reliable ABS, ASA, nylon or PC. Fine for a hobbyist, wrong tool for commercial work in engineering materials.
Verdicts are rule-driven from the spec sheet and current price (€815). They don't capture firmware polish, support quality, or reliability - so treat them as a sanity check, not a final answer.
Live offers
Every live listing on the English-language Amazon marketplaces that I've matched to this printer. Cheapest first. Affiliate links.
- 🇫🇷 Imprimante 3D Creality Ender 5 Plus, BL Touch, capteur d'extrémité de Filament, Impression Haute précision et Stable, Fonction d'impression de Reprise, Nouvelle Plate-Forme, Taille d'impression UltraAmazon.fr · New€814.90View
Close alternatives - what $815 gets you elsewhere
Think of this like the shopping-cart upsell: here's what a tenner more or less could buy you in roughly the same category. Same FDM tech, same marketplace, all prices live. Stretches are data-driven; they're not sponsored placements.
Save the money, same build volume at 64.0 L. You'd give up: nothing obvious on the spec sheet.
Get: 370°C hot end (was 260°C) · a proper heated chamber, so ABS/ASA/nylon become realistic.
Get: 370°C hot end (was 260°C) · a proper heated chamber, so ABS/ASA/nylon become realistic.
Frequently asked
What materials can the Creality Imprimante 3D Creality Ender 5 Plus print? +
At €815 the Creality Imprimante 3D Creality Ender 5 Plus is a PLA, PETG, TPU machine. The 260°C hot end covers PETG with a small safety margin. ABS and nylon need an enclosure plus more heat - not this printer.
How fast is the Creality Imprimante 3D Creality Ender 5 Plus? +
Advertised at 180 mm/s, but that is motion-system capability, not what the hot end can sustain. Expect real-world prints at 80-150 mm/s without quality collapse.
How big can I print on the Creality Imprimante 3D Creality Ender 5 Plus? +
350×350×400 mm (49.0 L). Big enough for helmets in one piece, full-scale cosplay props, or multiple medium parts in one run. Reliability starts mattering at this scale - a failed 20-hour print stings.
Does the Creality Imprimante 3D Creality Ender 5 Plus have auto-levelling? +
Yes - BLTouch auto-levelling probe. Not quite as clean as load-cell or LiDAR, but reliable once calibrated and a world better than manual paper-under-the-nozzle.
Is the Creality Imprimante 3D Creality Ender 5 Plus worth €815? +
€815 is serious hobbyist territory. For the Creality Imprimante 3D Creality Ender 5 Plus to justify this over a $500 machine it needs to deliver genuine speed (volumetric flow), reliability at speed, or access to engineering materials. Check the spec table above against those three.
