Pequeña Impresora 3D para Principiante
Updated 26 September 2026 · Live prices updated daily
Buy on Amazon.es - €110.87 →Affiliate link. Price live from the marketplace, not cached.
At a glance
What this printer gets right and wrong
- ✓ Under €300 - low-risk way to get into 3D printing without regretting the spend.
- ! Open frame - PLA and PETG only, realistically. Forget ABS or nylon done properly.
- ! 1.0 L build volume - fine for calibration prints and small parts, awkward for anything bigger than a mug.
Head-to-head spec + price table against the Dpofirs Pequeña Impresora 3D para Principiante. Verified printers on this marketplace only.
Sensible first-printer territory: priced where you can afford to get it wrong, with auto-levelling so the first layer isn't a ritual. You'll outgrow it in 18 months, which is fine.
Bedslinger with middling flow rate - you already have one of these. The whole point of upgrading is speed, rigidity, or print quality that your current machine can't hit. This doesn't clear that bar.
No active heated chamber or a hot end that tops out below 280°C means no reliable ABS, ASA, nylon or PC. Fine for a hobbyist, wrong tool for commercial work in engineering materials.
Verdicts are rule-driven from the spec sheet and current price (€111). They don't capture firmware polish, support quality, or reliability - so treat them as a sanity check, not a final answer.
Live offers
Every live listing on the English-language Amazon marketplaces that I've matched to this printer. Cheapest first. Affiliate links.
- 🇪🇸 Pequeña Impresora 3D para Principiante, Calefacción Rápida e Impresión Compacta de Impresión 3D de Impresión para Educación, Tamaño de Impresión de 4x4x4in (EU)Amazon.es · New€110.87View
- 🇮🇹 Dpofirs Piccola Stampante 3D per Principianti, Riscaldamento Rapido e Stampa di Stampa 3D Compatta per Istruzione, Dimensioni di Stampa 4x4x4in (EU)Amazon.it · New€111.74View
- 🇸🇪 Liten 3D -skrivare för Nybörjare, Snabb Uppvärmning och Utskrift Kompakt 3D -tryckmaskin för Utbildning, 4x4x4in Tryckstorlek (WHITE)Amazon.se · Newkr1230.26View
- 🇸🇪 Dpofirs 3D-skrivare Kompakt Bordsmodell, 100x100mm Utskriftsstorlek (#1)Amazon.se · Newkr1329.78View
Close alternatives - what €111 gets you elsewhere
Think of this like the shopping-cart upsell: here's what a tenner more or less could buy you in roughly the same category. Same FDM tech, same marketplace, all prices live. Stretches are data-driven; they're not sponsored placements.
Get: 4.8 L more build volume (5.8 L) · 275°C hot end (was —°C).
Get: 15.8 L more build volume (16.8 L) · 300°C hot end (was —°C).
Modest upgrade on the spec sheet.
Frequently asked
What materials can the Dpofirs Pequeña Impresora 3D para Principiante print? +
At €111 the Dpofirs Pequeña Impresora 3D para Principiante realistically prints PLA and TPU. The listed°C hot end is too tight for PETG with confidence and rules out ABS/nylon entirely.
How big can I print on the Dpofirs Pequeña Impresora 3D para Principiante? +
100×100×100 mm (1.0 L). Small build area. Fine for calibration prints, minis, keychains, small functional parts. Awkward for anything bigger than a coffee mug.
Is the Dpofirs Pequeña Impresora 3D para Principiante worth €111? +
At €111 the Dpofirs Pequeña Impresora 3D para Principiante is in hobby-entry territory - low-risk way to try the hobby. Expect older motion systems and basic feature sets, but print quality will surprise people coming from five-year-old reviews.
