3d- Easythreed 3d-printer voor kinderen en
Updated 26 September 2026 · Live prices updated daily
Buy on Amazon.nl - €157.89 →Affiliate link. Price live from the marketplace, not cached.
At a glance
What this printer gets right and wrong
- ✓ Under €300 - low-risk way to get into 3D printing without regretting the spend.
- ! Open frame - PLA and PETG only, realistically. Forget ABS or nylon done properly.
- ! Max hot-end temp only 210°C - PLA-dominant territory, no PETG with any safety margin.
- ! Manual levelling - plan a weekend of paper-under-the-nozzle rituals before your first clean first layer.
- ! 3.4 L build volume - fine for calibration prints and small parts, awkward for anything bigger than a mug.
Head-to-head spec + price table against the Zohisin 3d- Easythreed 3d-printer voor kinderen en. Verified printers on this marketplace only.
No auto-levelling means you'll spend your first weekend adjusting screws and fighting first-layer issues. Fine if you want to learn the hard way - frustrating if you just want prints.
Bedslinger with middling flow rate - you already have one of these. The whole point of upgrading is speed, rigidity, or print quality that your current machine can't hit. This doesn't clear that bar.
No active heated chamber or a hot end that tops out below 280°C means no reliable ABS, ASA, nylon or PC. Fine for a hobbyist, wrong tool for commercial work in engineering materials.
Verdicts are rule-driven from the spec sheet and current price (€158). They don't capture firmware polish, support quality, or reliability - so treat them as a sanity check, not a final answer.
Live offers
Every live listing on the English-language Amazon marketplaces that I've matched to this printer. Cheapest first. Affiliate links.
- 🇳🇱 3d-printer Easythreed 3d-printer voor kinderen en beginners Stille draagbare lichtgewicht 3d-drukmachine voor thuisgebruik (EU Plug)Amazon.nl · New€157.89View
Close alternatives - what $158 gets you elsewhere
Think of this like the shopping-cart upsell: here's what a tenner more or less could buy you in roughly the same category. Same FDM tech, same marketplace, all prices live. Stretches are data-driven; they're not sponsored placements.
Save the money, similar specs on paper. You'd give up: 3.4 L vs 1.0 L build volume.
Get: 245°C hot end (was 210°C).
Get: 8.7 L more build volume (12.1 L) · 260°C hot end (was 210°C).
Frequently asked
What materials can the Zohisin 3d- Easythreed 3d-printer voor kinderen en print? +
At €158 the Zohisin 3d- Easythreed 3d-printer voor kinderen en realistically prints PLA and TPU. The 210°C hot end is too tight for PETG with confidence and rules out ABS/nylon entirely.
How fast is the Zohisin 3d- Easythreed 3d-printer voor kinderen en? +
Advertised at 50 mm/s, but that is motion-system capability, not what the hot end can sustain. Expect real-world prints at 80-150 mm/s without quality collapse.
How big can I print on the Zohisin 3d- Easythreed 3d-printer voor kinderen en? +
150×150×150 mm (3.4 L). Small build area. Fine for calibration prints, minis, keychains, small functional parts. Awkward for anything bigger than a coffee mug.
Does the Zohisin 3d- Easythreed 3d-printer voor kinderen en have auto-levelling? +
No - manual levelling only. Plan a weekend tuning the bed with a piece of paper and a hex key before your first clean first layer. At this price in 2026, that is a real drawback.
Is the Zohisin 3d- Easythreed 3d-printer voor kinderen en worth €158? +
At €158 the Zohisin 3d- Easythreed 3d-printer voor kinderen en is in hobby-entry territory - low-risk way to try the hobby. Expect older motion systems and basic feature sets, but print quality will surprise people coming from five-year-old reviews.
