Mini 3D- voor Kinderen
Updated 5 November 2026 · Live prices updated daily
Buy on Amazon.nl - €221.94 →Affiliate link. Price live from the marketplace, not cached.
Specs shown are inferred from the listing, not yet hand-verified.
At a glance
What this printer gets right and wrong
- ✓ Under €300 - low-risk way to get into 3D printing without regretting the spend.
- ! Nothing stands out as a clear weakness on the spec sheet - but spec sheets never capture firmware polish, customer support or long-term reliability. Read owner reports before committing.
Head-to-head spec + price table against the Fafeicy Mini 3D- voor Kinderen. Verified printers on this marketplace only.
Sensible first-printer territory: priced where you can afford to get it wrong, with auto-levelling so the first layer isn't a ritual. You'll outgrow it in 18 months, which is fine.
Bedslinger with middling flow rate - you already have one of these. The whole point of upgrading is speed, rigidity, or print quality that your current machine can't hit. This doesn't clear that bar.
No active heated chamber or a hot end that tops out below 280°C means no reliable ABS, ASA, nylon or PC. Fine for a hobbyist, wrong tool for commercial work in engineering materials.
Verdicts are rule-driven from the spec sheet and current price (€222). They don't capture firmware polish, support quality, or reliability - so treat them as a sanity check, not a final answer.
Live offers
Every live listing on the English-language Amazon marketplaces that I've matched to this printer. Cheapest first. Affiliate links.
- 🇳🇱 Fafeicy Mini 3D-printer voor Kinderen, 100x100x100mm Verwijderbaar | FDM Desktop 3D-printer, één-toets Afdrukken met 2,4 Inch Touchscreen, PLA-filament Compatibel met TF-kaart en USBAmazon.nl · New€221.94View
- 🇪🇸 Jemora Impresora 3D K6 Plus Máquina de impresión de escritorio FDM 150x150x150 mm/5,9x5,9x5,9 pulgadas Tamaño de impresión Plataforma extraíble con control de pantalla táctil Impresión conAmazon.es · New€230.49View
- 🇳🇱 Fafeicy Mini 3D-printer voor Kinderen, 100x100x100mm Verwijderbaar | FDM Desktop 3D-printer, één-toets Afdrukken met 2,4 Inch Touchscreen, PLA-filament Compatibel met TF-kaart en USBAmazon.nl · New€234.11View
- 🇵🇱 Fafeicy Mini Drukarka 3D, Biurkowa Maszyna do Druku FDM o Polu Roboczym | Odejmowana Platforma, 2,4" Ekran Dotykowy, Drukowanie Jednym Przyciskiem, Ultra Cicha Praca, łączność Karty TF i USB,Amazon.pl · Newzł963.24View
- 🇸🇪 Fafeicy Mini 3D-skrivare för Barn, Mm Avtagbar Plattform (B-EU) | FDM-skrivare för Skrivbord, Utskrift med en Knapptryckning med 2,4- Pekskärm, PLA-filament Kompatibelt med TF-kort och USBAmazon.se · Newkr2399.29View
Close alternatives - what $222 gets you elsewhere
Think of this like the shopping-cart upsell: here's what a tenner more or less could buy you in roughly the same category. Same FDM tech, same marketplace, all prices live. Stretches are data-driven; they're not sponsored placements.
Save the money, same build volume at 12.1 L. You'd give up: nothing obvious on the spec sheet.
Get: 0.9 L more build volume (0.9 L).
Get: 12.1 L more build volume (12.1 L) · 300°C hot end (was —°C).
Frequently asked
What materials can the Fafeicy Mini 3D- voor Kinderen print? +
At €222 the Fafeicy Mini 3D- voor Kinderen realistically prints PLA and TPU. The listed°C hot end is too tight for PETG with confidence and rules out ABS/nylon entirely.
Is the Fafeicy Mini 3D- voor Kinderen worth €222? +
€222 is the sweet spot tier. The Fafeicy Mini 3D- voor Kinderen competes directly with the current Bambu A1, Creality K1 and Prusa Mini generation. Hardware-per-pound is tight here - the differentiator is usually software polish and ecosystem.
