Centauri 2 Imprimante 3D CoreXY Volume
Updated 26 September 2026 · Live prices updated daily
Buy on Amazon.fr - €279.00 →Affiliate link. Price live from the marketplace, not cached.
At a glance
What this printer gets right and wrong
- ✓ CoreXY motion system - faster and more rigid than a bedslinger, especially on tall prints.
- ✓ 350°C hot end - handles carbon-fibre nylons and PC, not just the easy stuff.
- ✓ Under €300 - low-risk way to get into 3D printing without regretting the spend.
- ! Open frame - PLA and PETG only, realistically. Forget ABS or nylon done properly.
Head-to-head spec + price table against the ELEGOO Centauri 2 Imprimante 3D CoreXY Volume. Verified printers on this marketplace only.
Sensible first-printer territory: priced where you can afford to get it wrong, with auto-levelling so the first layer isn't a ritual. You'll outgrow it in 18 months, which is fine.
Cheap enough to add as a second machine but it's not the jump forward an upgrade is meant to be. Consider a used P1S or a Voron kit instead.
No active heated chamber or a hot end that tops out below 280°C means no reliable ABS, ASA, nylon or PC. Fine for a hobbyist, wrong tool for commercial work in engineering materials.
Verdicts are rule-driven from the spec sheet and current price (€279). They don't capture firmware polish, support quality, or reliability - so treat them as a sanity check, not a final answer.
Live offers
Every live listing on the English-language Amazon marketplaces that I've matched to this printer. Cheapest first. Affiliate links.
- 🇫🇷 ELEGOO Centauri 2 Imprimante 3D CoreXY Volume d'impression 256×256×256mmAmazon.fr · New€279.00View
Close alternatives - what €279 gets you elsewhere
Think of this like the shopping-cart upsell: here's what a tenner more or less could buy you in roughly the same category. Same FDM tech, same marketplace, all prices live. Stretches are data-driven; they're not sponsored placements.
Save the money, similar specs on paper. You'd give up: 16.8 L vs 10.6 L build volume, 350°C hot end vs 280°C.
Modest upgrade on the spec sheet.
Get: 19.2 L more build volume (36.0 L).
Frequently asked
What materials can the ELEGOO Centauri 2 Imprimante 3D CoreXY Volume print? +
At €279 the ELEGOO Centauri 2 Imprimante 3D CoreXY Volume has the hot end for engineering materials (350°C) but no active chamber, so ABS and nylon will warp on anything larger than a phone case. Treat it as a PLA/PETG/TPU workhorse with headroom for the occasional small ABS part.
How fast is the ELEGOO Centauri 2 Imprimante 3D CoreXY Volume? +
Advertised at 500 mm/s, but that is motion-system capability, not what the hot end can sustain. Expect real-world prints at 80-150 mm/s without quality collapse.
How big can I print on the ELEGOO Centauri 2 Imprimante 3D CoreXY Volume? +
256×256×256 mm (16.8 L). Comfortable for medium props, functional parts up to ~25 cm, and batch printing. One of the most-used working sizes in hobby 3D printing.
Does the ELEGOO Centauri 2 Imprimante 3D CoreXY Volume have auto-levelling? +
Yes - Four-point auto leveling auto-levelling probe. Not quite as clean as load-cell or LiDAR, but reliable once calibrated and a world better than manual paper-under-the-nozzle.
Is the ELEGOO Centauri 2 Imprimante 3D CoreXY Volume worth €279? +
€279 is the sweet spot tier. The ELEGOO Centauri 2 Imprimante 3D CoreXY Volume competes directly with the current Bambu A1, Creality K1 and Prusa Mini generation. Hardware-per-pound is tight here - the differentiator is usually software polish and ecosystem.
