MA22 Belt
Updated 16 October 2026 · Live prices updated daily
Buy on Amazon.ca - $459.99 →Affiliate link. Price live from the marketplace, not cached.
At a glance
What this printer gets right and wrong
- ✓ CoreXY motion system - faster and more rigid than a bedslinger, especially on tall prints.
- ! Nothing stands out as a clear weakness on the spec sheet - but spec sheets never capture firmware polish, customer support or long-term reliability. Read owner reports before committing.
Head-to-head spec + price table against the MALYAN MA22 Belt. Verified printers on this marketplace only.
Sensible first-printer territory: priced where you can afford to get it wrong, with auto-levelling so the first layer isn't a ritual. You'll outgrow it in 18 months, which is fine.
This is the kind of move that makes you wonder why you put up with your old machine for so long. Faster, more rigid, and the first layer stops being a gamble.
No active heated chamber or a hot end that tops out below 280°C means no reliable ABS, ASA, nylon or PC. Fine for a hobbyist, wrong tool for commercial work in engineering materials.
Verdicts are rule-driven from the spec sheet and current price ($460). They don't capture firmware polish, support quality, or reliability - so treat them as a sanity check, not a final answer.
Live offers
Every live listing on the English-language Amazon marketplaces that I've matched to this printer. Cheapest first. Affiliate links.
- 🇨🇦 MALYAN MA22 Belt 3D Printer, Infinite Z-Axis Belt Printer with Touchscreen, Core-XY Structure, WiFi Print, Dual-Gear Metal Extruder, for Farm Batch Printing, Printing Size 200×180×∞mmAmazon.ca · New$459.99View
Close alternatives - what $460 gets you elsewhere
Think of this like the shopping-cart upsell: here's what a tenner more or less could buy you in roughly the same category. Same FDM tech, same marketplace, all prices live. Stretches are data-driven; they're not sponsored placements.
Save the money, same build volume at 17.6 L. You'd give up: nothing obvious on the spec sheet.
Get: 17.6 L more build volume (17.6 L) · 300°C hot end (was —°C).
Get: 15.6 L more build volume (15.6 L) · 320°C hot end (was —°C).
Frequently asked
What materials can the MALYAN MA22 Belt print? +
At $460 the MALYAN MA22 Belt realistically prints PLA and TPU. The listed°C hot end is too tight for PETG with confidence and rules out ABS/nylon entirely.
Is the MALYAN MA22 Belt worth $460? +
$460 is the sweet spot tier. The MALYAN MA22 Belt competes directly with the current Bambu A1, Creality K1 and Prusa Mini generation. Hardware-per-pound is tight here - the differentiator is usually software polish and ecosystem.
