drukarka 3D i3 MK3S zestaw do montażu
Updated 27 September 2026 · Live prices updated daily
Buy on Amazon.pl - zł4067.97 →Affiliate link. Price live from the marketplace, not cached.
At a glance
What this printer gets right and wrong
- ✓ 300°C hot end - handles carbon-fibre nylons and PC, not just the easy stuff.
- ! Bedslinger design - expect ringing artefacts on tall prints at speed.
- ! Open frame - PLA and PETG only, realistically. Forget ABS or nylon done properly.
- ! Over zł1,500 - you are paying for polish and ecosystem, not raw capability. Cheaper machines match the hardware on paper.
Head-to-head spec + price table against the Prusa drukarka 3D i3 MK3S zestaw do montażu. Verified printers on this marketplace only.
At this price you're well past the sweet spot for a first printer. There's no shame in starting with something cheaper - you'll learn more on a 200-400 machine and have money left for filament.
Bedslinger with middling flow rate - you already have one of these. The whole point of upgrading is speed, rigidity, or print quality that your current machine can't hit. This doesn't clear that bar.
No active heated chamber or a hot end that tops out below 280°C means no reliable ABS, ASA, nylon or PC. Fine for a hobbyist, wrong tool for commercial work in engineering materials.
Verdicts are rule-driven from the spec sheet and current price (zł4068). They don't capture firmware polish, support quality, or reliability - so treat them as a sanity check, not a final answer.
Live offers
Every live listing on the English-language Amazon marketplaces that I've matched to this printer. Cheapest first. Affiliate links.
- 🇵🇱 Prusa drukarka 3D i3 MK3S zestaw do montażuAmazon.pl · Newzł4067.97View
Close alternatives - what $4068 gets you elsewhere
Think of this like the shopping-cart upsell: here's what a tenner more or less could buy you in roughly the same category. Same FDM tech, same marketplace, all prices live. Stretches are data-driven; they're not sponsored placements.
Save the money, same build volume at 19.0 L. You'd give up: nothing obvious on the spec sheet.
Modest upgrade on the spec sheet.
Modest upgrade on the spec sheet.
Frequently asked
What materials can the Prusa drukarka 3D i3 MK3S zestaw do montażu print? +
At zł4068 the Prusa drukarka 3D i3 MK3S zestaw do montażu has the hot end for engineering materials (300°C) but no active chamber, so ABS and nylon will warp on anything larger than a phone case. Treat it as a PLA/PETG/TPU workhorse with headroom for the occasional small ABS part.
How fast is the Prusa drukarka 3D i3 MK3S zestaw do montażu? +
Advertised at 200 mm/s, but that is motion-system capability, not what the hot end can sustain. Expect real-world prints at 80-150 mm/s without quality collapse.
How big can I print on the Prusa drukarka 3D i3 MK3S zestaw do montażu? +
250×210×210 mm (11.0 L). Comfortable for medium props, functional parts up to ~25 cm, and batch printing. One of the most-used working sizes in hobby 3D printing.
Does the Prusa drukarka 3D i3 MK3S zestaw do montażu have auto-levelling? +
Yes - SuperPINDA auto-levelling probe. Not quite as clean as load-cell or LiDAR, but reliable once calibrated and a world better than manual paper-under-the-nozzle.
Is the Prusa drukarka 3D i3 MK3S zestaw do montażu worth zł4068? +
zł4068+ is prosumer/workshop money. Diminishing returns on print quality versus a $700-1000 machine; real returns on long-term reliability, support contracts and replacement parts. Worth it if the printer makes you money, overkill if it is a weekend hobby.
