- 3D1AQ - 3DWOX 1 - Open Source Filament
Updated 17 September 2026 · Live prices updated daily
Buy on Amazon.com - $1357.07 →Affiliate link. Price live from the marketplace, not cached.
At a glance
What this printer gets right and wrong
Nothing jumps out on the spec sheet as a standout feature at this price.
- ! Max hot-end temp only 250°C - PLA-dominant territory, no PETG with any safety margin.
Head-to-head spec + price table against the Sindoh - 3D1AQ - 3DWOX 1 - Open Source Filament. Verified printers on this marketplace only.
At this price you're well past the sweet spot for a first printer. There's no shame in starting with something cheaper - you'll learn more on a 200-400 machine and have money left for filament.
Bedslinger with middling flow rate - you already have one of these. The whole point of upgrading is speed, rigidity, or print quality that your current machine can't hit. This doesn't clear that bar.
No active heated chamber or a hot end that tops out below 280°C means no reliable ABS, ASA, nylon or PC. Fine for a hobbyist, wrong tool for commercial work in engineering materials.
Verdicts are rule-driven from the spec sheet and current price ($1357). They don't capture firmware polish, support quality, or reliability - so treat them as a sanity check, not a final answer.
Live offers
Every live listing on the English-language Amazon marketplaces that I've matched to this printer. Cheapest first. Affiliate links.
- 🇺🇸 Sindoh - 3D1AQ - 3DWOX 1 3D Printer - Open Source Filament, WiFi, Heatable Metal Flex Bed, HEPA Filter, Intelligent Bed Leveling Assistance, Built-in Camera, Build Size 8.2"x7.9"x7.7"Amazon.com · New$1357.07View
Close alternatives - what $1357 gets you elsewhere
Think of this like the shopping-cart upsell: here's what a tenner more or less could buy you in roughly the same category. Same FDM tech, same marketplace, all prices live. Stretches are data-driven; they're not sponsored placements.
Save the money, same build volume at 42.9 L. You'd give up: nothing obvious on the spec sheet.
Get: 4.3 L more build volume (12.5 L).
Get: 6.7 L more build volume (14.8 L) · 290°C hot end (was 250°C).
Frequently asked
What materials can the Sindoh - 3D1AQ - 3DWOX 1 - Open Source Filament print? +
At $1357 the Sindoh - 3D1AQ - 3DWOX 1 - Open Source Filament realistically prints PLA and TPU. The 250°C hot end is too tight for PETG with confidence and rules out ABS/nylon entirely.
How fast is the Sindoh - 3D1AQ - 3DWOX 1 - Open Source Filament? +
Advertised at 200 mm/s, but that is motion-system capability, not what the hot end can sustain. Expect real-world prints at 80-150 mm/s without quality collapse.
How big can I print on the Sindoh - 3D1AQ - 3DWOX 1 - Open Source Filament? +
210×200×195 mm (8.2 L). Mainstream bed size - fits 90 % of what people actually print. Cosplay helmets will need to be sliced into sections.
Does the Sindoh - 3D1AQ - 3DWOX 1 - Open Source Filament have auto-levelling? +
Yes - Auto Leveling Measurement + Ma auto-levelling probe. Not quite as clean as load-cell or LiDAR, but reliable once calibrated and a world better than manual paper-under-the-nozzle.
Is the Sindoh - 3D1AQ - 3DWOX 1 - Open Source Filament worth $1357? +
$1357+ is prosumer/workshop money. Diminishing returns on print quality versus a $700-1000 machine; real returns on long-term reliability, support contracts and replacement parts. Worth it if the printer makes you money, overkill if it is a weekend hobby.
