Stampante 3D Up mini 3D stampanti & Accessories
Updated 16 October 2026 · Live prices updated daily
Buy on Amazon.it - €614.00 →Affiliate link. Price live from the marketplace, not cached.
At a glance
What this printer gets right and wrong
Nothing jumps out on the spec sheet as a standout feature at this price.
- ! Manual levelling - plan a weekend of paper-under-the-nozzle rituals before your first clean first layer.
- ! 1.7 L build volume - fine for calibration prints and small parts, awkward for anything bigger than a mug.
Head-to-head spec + price table against the UP!4 Stampante 3D Up mini 3D stampanti & Accessories. Verified printers on this marketplace only.
At this price you're well past the sweet spot for a first printer. There's no shame in starting with something cheaper - you'll learn more on a 200-400 machine and have money left for filament.
Bedslinger with middling flow rate - you already have one of these. The whole point of upgrading is speed, rigidity, or print quality that your current machine can't hit. This doesn't clear that bar.
No active heated chamber or a hot end that tops out below 280°C means no reliable ABS, ASA, nylon or PC. Fine for a hobbyist, wrong tool for commercial work in engineering materials.
Verdicts are rule-driven from the spec sheet and current price (€614). They don't capture firmware polish, support quality, or reliability - so treat them as a sanity check, not a final answer.
Live offers
Every live listing on the English-language Amazon marketplaces that I've matched to this printer. Cheapest first. Affiliate links.
- 🇮🇹 Stampante 3D Up mini 3D stampanti & Accessories stampanti 3D, stampante 3D, UP Mini, connettività: USB, tensione di ingresso VAC: 250 VAC,Amazon.it · Used€614.00View
- 🇫🇷 Imprimante 3D UP MINI imprimantes 3D & accessoires imprimantes 3D, imprimante 3D, UP MINI, Connectivité : USB, tension d'entrée : aspirateur, 250 VACAmazon.fr · New€2000.00View
- 🇮🇹 Stampante 3D Up mini 3D stampanti & Accessories stampanti 3D, stampante 3D, UP Mini, connettività: USB, tensione di ingresso VAC: 250 VAC,Amazon.it · New€2000.00View
Close alternatives - what $614 gets you elsewhere
Think of this like the shopping-cart upsell: here's what a tenner more or less could buy you in roughly the same category. Same FDM tech, same marketplace, all prices live. Stretches are data-driven; they're not sponsored placements.
Save the money, same build volume at 27.0 L. You'd give up: nothing obvious on the spec sheet.
Get: 72.4 L more build volume (74.1 L).
Get: 25.3 L more build volume (27.0 L) · 300°C hot end (was 260°C).
Frequently asked
What materials can the UP!4 Stampante 3D Up mini 3D stampanti & Accessories print? +
At €614 the UP!4 Stampante 3D Up mini 3D stampanti & Accessories is a PLA, PETG, TPU machine. The 260°C hot end covers PETG with a small safety margin. ABS and nylon need an enclosure plus more heat - not this printer.
How big can I print on the UP!4 Stampante 3D Up mini 3D stampanti & Accessories? +
120×120×120 mm (1.7 L). Small build area. Fine for calibration prints, minis, keychains, small functional parts. Awkward for anything bigger than a coffee mug.
Does the UP!4 Stampante 3D Up mini 3D stampanti & Accessories have auto-levelling? +
No - manual levelling only. Plan a weekend tuning the bed with a piece of paper and a hex key before your first clean first layer. At this price in 2026, that is a real drawback.
Is the UP!4 Stampante 3D Up mini 3D stampanti & Accessories worth €614? +
€614 is serious hobbyist territory. For the UP!4 Stampante 3D Up mini 3D stampanti & Accessories to justify this over a $500 machine it needs to deliver genuine speed (volumetric flow), reliability at speed, or access to engineering materials. Check the spec table above against those three.
