Mini Imprimante 3D
Updated 6 September 2026 · Live prices on every page load from Amazon US + UK
Buy on Amazon.fr - €101.34 →Affiliate link. Price live from the marketplace, not cached.
At a glance
What this printer gets right and wrong
- ✓ 100.0 L build volume - room for helmets, large functional parts, bulk runs.
- ✓ Under €300 - low-risk way to get into 3D printing without regretting the spend.
- ! Open frame - PLA and PETG only, realistically. Forget ABS or nylon done properly.
Head-to-head spec + price table against the XUMIUZIY Mini Imprimante 3D. Verified printers on this marketplace only.
Sensible first-printer territory: priced where you can afford to get it wrong, with auto-levelling so the first layer isn't a ritual. You'll outgrow it in 18 months, which is fine.
Bedslinger with middling flow rate - you already have one of these. The whole point of upgrading is speed, rigidity, or print quality that your current machine can't hit. This doesn't clear that bar.
No active heated chamber or a hot end that tops out below 280°C means no reliable ABS, ASA, nylon or PC. Fine for a hobbyist, wrong tool for commercial work in engineering materials.
Verdicts are rule-driven from the spec sheet and current price (€101). They don't capture firmware polish, support quality, or reliability - so treat them as a sanity check, not a final answer.
Live offers
Every live listing on the English-language Amazon marketplaces that I've matched to this printer. Cheapest first. Affiliate links.
- 🇫🇷 Mini Imprimante 3D, Imprimantes 3D pour les Débutants, Imprimante 3D de Division de Fréquence à Grande Vitesse et de Précision, Taille D'impression env. 100 X 100 X 100 Mm /Amazon.fr · New€101.34View
Close alternatives - what €101 gets you elsewhere
Think of this like the shopping-cart upsell: here's what a tenner more or less could buy you in roughly the same category. Same FDM tech, same marketplace, all prices live. Stretches are data-driven; they're not sponsored placements.
Save the money, similar specs on paper. You'd give up: 100.0 L vs 1.1 L build volume.
Get: 230°C hot end (was —°C).
Get: 300°C hot end (was —°C).
Frequently asked
What materials can the XUMIUZIY Mini Imprimante 3D print? +
At €101 the XUMIUZIY Mini Imprimante 3D realistically prints PLA and TPU. The listed°C hot end is too tight for PETG with confidence and rules out ABS/nylon entirely.
How big can I print on the XUMIUZIY Mini Imprimante 3D? +
100×100×100 mm (100.0 L). Big enough for helmets in one piece, full-scale cosplay props, or multiple medium parts in one run. Reliability starts mattering at this scale - a failed 20-hour print stings.
Is the XUMIUZIY Mini Imprimante 3D worth €101? +
At €101 the XUMIUZIY Mini Imprimante 3D is in hobby-entry territory - low-risk way to try the hobby. Expect older motion systems and basic feature sets, but print quality will surprise people coming from five-year-old reviews.
