Imprimante 3D améliorée Z9V5 PRO MK4 avec
Updated 26 September 2026 · Live prices updated daily
Buy on Amazon.fr - €598.45 →Affiliate link. Price live from the marketplace, not cached.
At a glance
What this printer gets right and wrong
- ✓ CoreXY motion system - faster and more rigid than a bedslinger, especially on tall prints.
- ✓ 36.0 L build volume - room for helmets, large functional parts, bulk runs.
- ! Open frame - PLA and PETG only, realistically. Forget ABS or nylon done properly.
Head-to-head spec + price table against the ZEYUAN Imprimante 3D améliorée Z9V5 PRO MK4 avec. Verified printers on this marketplace only.
Sensible first-printer territory: priced where you can afford to get it wrong, with auto-levelling so the first layer isn't a ritual. You'll outgrow it in 18 months, which is fine.
This is the kind of move that makes you wonder why you put up with your old machine for so long. Faster, more rigid, and the first layer stops being a gamble.
No active heated chamber or a hot end that tops out below 280°C means no reliable ABS, ASA, nylon or PC. Fine for a hobbyist, wrong tool for commercial work in engineering materials.
Verdicts are rule-driven from the spec sheet and current price (€598). They don't capture firmware polish, support quality, or reliability - so treat them as a sanity check, not a final answer.
Live offers
Every live listing on the English-language Amazon marketplaces that I've matched to this printer. Cheapest first. Affiliate links.
- 🇫🇷 ZEYUAN Imprimante 3D améliorée Z9V5 PRO MK4 avec conception à quatre extrudeuses réglables Impression multicolore Mise à niveau automatique Fonction d'impression de reprise Taille d'impressionAmazon.fr · New€598.45View
Close alternatives - what $598 gets you elsewhere
Think of this like the shopping-cart upsell: here's what a tenner more or less could buy you in roughly the same category. Same FDM tech, same marketplace, all prices live. Stretches are data-driven; they're not sponsored placements.
Save the money, similar specs on paper. You'd give up: 36.0 L vs 2.7 L build volume, 260°C hot end vs undefined°C.
Get: 370°C hot end (was 260°C) · a proper heated chamber, so ABS/ASA/nylon become realistic.
Get: 370°C hot end (was 260°C) · a proper heated chamber, so ABS/ASA/nylon become realistic.
Frequently asked
What materials can the ZEYUAN Imprimante 3D améliorée Z9V5 PRO MK4 avec print? +
At €598 the ZEYUAN Imprimante 3D améliorée Z9V5 PRO MK4 avec is a PLA, PETG, TPU machine. The 260°C hot end covers PETG with a small safety margin. ABS and nylon need an enclosure plus more heat - not this printer.
How fast is the ZEYUAN Imprimante 3D améliorée Z9V5 PRO MK4 avec? +
Advertised at 100 mm/s, but that is motion-system capability, not what the hot end can sustain. Expect real-world prints at 80-150 mm/s without quality collapse.
How big can I print on the ZEYUAN Imprimante 3D améliorée Z9V5 PRO MK4 avec? +
300×300×400 mm (36.0 L). Big enough for helmets in one piece, full-scale cosplay props, or multiple medium parts in one run. Reliability starts mattering at this scale - a failed 20-hour print stings.
Does the ZEYUAN Imprimante 3D améliorée Z9V5 PRO MK4 avec have auto-levelling? +
Yes - PL-08N auto-levelling probe. Not quite as clean as load-cell or LiDAR, but reliable once calibrated and a world better than manual paper-under-the-nozzle.
Is the ZEYUAN Imprimante 3D améliorée Z9V5 PRO MK4 avec worth €598? +
€598 is serious hobbyist territory. For the ZEYUAN Imprimante 3D améliorée Z9V5 PRO MK4 avec to justify this over a $500 machine it needs to deliver genuine speed (volumetric flow), reliability at speed, or access to engineering materials. Check the spec table above against those three.
