3D-Pioneer.com
3D-Pioneer.com

Finde den besten 3D-Drucker für dein Geld – Specs vs. Preis, ohne Marketing-Blabla.

Best 3D printers with high-temp heated beds

Updated 26 September 2026 · Live prices updated daily

Printers whose heated bed clears 100 °C. Essential for reliable ABS, ASA and PA-CF adhesion without lifting corners.

  1. #1
    ANYCUBIC Kobra S1 MAX Impresora 3D
    ANYCUBIC
    Kobra S1 MAX Impresora 3D
    €649 CoreXY · heated chamber · 42.9 L · 350°C · LeviQ 3.0
  2. #2
    FLASHFORGE Creator 5 Pro Impresora 3D
    FLASHFORGE
    Creator 5 Pro Impresora 3D
    €829 CoreXY · heated chamber · 16.8 L · 320°C · Fully Automatic Calibration &
  3. #3
    ORIGINAL PRUSA Prusa Core One
    ORIGINAL PRUSA
    Prusa Core One
    €1149 CoreXY · heated chamber · 14.8 L · 290°C · Load cell
  4. #4
    QIDI TECH QIDI Q2C Impresora 3D
    QIDI TECH
    QIDI Q2C Impresora 3D
    €359 CoreXY · 18.9 L · 370°C · Loadcell Sensor Integrated int
  5. #5
    Creality K1 MAX Impresora 3D Alta Velocidad 600mm/s
    Creality
    K1 MAX Impresora 3D Alta Velocidad 600mm/s
    €749 CoreXY · 27.0 L · 300°C · AI LiDAR
  6. #6
    QIDI TECH QIDI Q2 Impresora 3D
    QIDI TECH
    QIDI Q2 Impresora 3D
    €499 CoreXY · 18.7 L · 370°C
  7. #7
    ANYCUBIC Kobra S1 Impresoras 3D Multicolor Secado e
    ANYCUBIC
    Kobra S1 Impresoras 3D Multicolor Secado e
    €459 CoreXY · 15.6 L · 320°C · LeviQ3.0
  8. #8
    Creality K2 Plus Impresora 3D Multicolor 4 a 16 Col
    Creality
    K2 Plus Impresora 3D Multicolor 4 a 16 Col
    €1349 CoreXY · 42.9 L · 350°C · Strain gauge
  9. #9
    FLASHFORGE Creator 5 Impresora 3D
    FLASHFORGE
    Creator 5 Impresora 3D
    €679 CoreXY · 16.8 L · 320°C · Fully Automatic Calibration &
  10. #10
    ELEGOO Centauri 2 Impresora 3D CoreXY Volumen de
    ELEGOO
    Centauri 2 Impresora 3D CoreXY Volumen de
    €280 CoreXY · 16.8 L · 350°C · Four-point auto leveling

Matt's take

Bed temperature is the quiet spec that separates "can print ABS if you cross fingers" from "prints ABS reliably". Most PLA-focused machines top out at 70-80 °C because that is all PLA needs. ABS wants 100-110 °C, ASA similar, and filled nylons 90-110 °C. Without that bed heat, corners peel as the print cools and you end up running a brim or raft on every part. Pair with an active heated chamber for best results - bed heat alone helps but doesn't fully solve warp on tall ABS.

Frequently asked

Do I need a 100 °C heated bed? +

Only if you print ABS, ASA, or filled nylons. PLA and PETG are happy at 60-80 °C. If you never leave PLA territory, a high-temp bed is unused capability.

Why does bed temperature matter for ABS? +

ABS shrinks as it cools from its 100 °C+ print temperature. A hot bed keeps the bottom layers near glass transition, so the shrink happens gradually rather than snapping the print off the plate at hour three.

Is a garolite/FR4 bed surface different from PEI? +

Garolite is the de-facto surface for nylon because nylon refuses to stick to PEI. If you plan to print nylon, check that the printer either ships a garolite plate or accepts a swap-in one. Otherwise it is an extra £30 and often an extra week's wait.

Other shortlists
for ABS, ASA and nylon large-format 3D printers CoreXY 3D printers for beginners Quietest 3D printers - flat and studio friendly multi-colour and multi-material 3D printers for tabletop miniatures for schools and classrooms with remote monitoring Fastest 3D printers (by real volumetric flow) compact 3D printers (small desks, small spaces) for cosplay and props

Related reading

Long readIs an enclosed 3D printer worth it?When the enclosure premium actually pays back - and when it is money wasted on PLA.Read →Long readHow to pick your first 3D printerSpec by spec, what actually matters on a first printer and what the marketing hopes you will not question.Read →

Ranking is spec-driven. It favours printers that objectively have the capabilities this shortlist targets. Firmware, support quality and long-term reliability aren't on the spec sheet - read the full printer page and owner reports before committing.