Kobra S1
Updated 9 September 2026 · Live prices updated daily
Buy on Amazon.com - $399.99 →Affiliate link. Price live from the marketplace, not cached.
At a glance
What this printer gets right and wrong
Nothing jumps out on the spec sheet as a standout feature at this price.
- ! Nothing stands out as a clear weakness on the spec sheet - but spec sheets never capture firmware polish, customer support or long-term reliability. Read owner reports before committing.
Head-to-head spec + price table against the ANYCUBIC Kobra S1. Verified printers on this marketplace only.
Sensible first-printer territory: priced where you can afford to get it wrong, with auto-levelling so the first layer isn't a ritual. You'll outgrow it in 18 months, which is fine.
Bedslinger with middling flow rate - you already have one of these. The whole point of upgrading is speed, rigidity, or print quality that your current machine can't hit. This doesn't clear that bar.
No active heated chamber or a hot end that tops out below 280°C means no reliable ABS, ASA, nylon or PC. Fine for a hobbyist, wrong tool for commercial work in engineering materials.
Verdicts are rule-driven from the spec sheet and current price ($400). They don't capture firmware polish, support quality, or reliability - so treat them as a sanity check, not a final answer.
Live offers
Every live listing on the English-language Amazon marketplaces that I've matched to this printer. Cheapest first. Affiliate links.
- 🇺🇸 Anycubic Kobra S1 3D Printer Only, Unlock Multicolor Printing with ACE ProAmazon.com · New$399.99View
- 🇺🇸 Anycubic Kobra S1 3D Printer Only, 600mm/s High Speed Printing and Full Auto Leveling, Free-Clogging Extruder with 320℃ Hotend, Mental CoreXY Strucuture Built-in Camera, 44dB Low Noise 250*250*250mmAmazon.com · New$399.99View
- 🇺🇸 (Bundle ANYCUBIC 4kg PLA Filament 1.75mm) Anycubic Kobra S1 3D Printer Only, 600mm/s High Speed Printing and Full Auto Leveling, Black+White+Peach Fuzz+Interstellar VioletAmazon.com · New$459.98View
Close alternatives - what $400 gets you elsewhere
Think of this like the shopping-cart upsell: here's what a tenner more or less could buy you in roughly the same category. Same printer tech, same marketplace, all prices live. Stretches are data-driven; they're not sponsored placements.
Get: 16.7 L more build volume (16.7 L).
Modest upgrade on the spec sheet.
Get: 166.4 L more build volume (166.4 L).
Frequently asked
What materials can the ANYCUBIC Kobra S1 print? +
At $400 the ANYCUBIC Kobra S1 realistically prints PLA and TPU. The listed°C hot end is too tight for PETG with confidence and rules out ABS/nylon entirely.
Is the ANYCUBIC Kobra S1 worth $400? +
$400 is the sweet spot tier. The ANYCUBIC Kobra S1 competes directly with the current Bambu A1, Creality K1 and Prusa Mini generation. Hardware-per-pound is tight here - the differentiator is usually software polish and ecosystem.
