Imprimante 3D GIANTARM M1
Updated 26 September 2026 · Live prices updated daily
Buy on Amazon.fr - €199.99 →Affiliate link. Price live from the marketplace, not cached.
At a glance
What this printer gets right and wrong
- ✓ Under €300 - low-risk way to get into 3D printing without regretting the spend.
- ! Open frame - PLA and PETG only, realistically. Forget ABS or nylon done properly.
Head-to-head spec + price table against the GIANTARM Imprimante 3D GIANTARM M1. Verified printers on this marketplace only.
Sensible first-printer territory: priced where you can afford to get it wrong, with auto-levelling so the first layer isn't a ritual. You'll outgrow it in 18 months, which is fine.
Bedslinger with middling flow rate - you already have one of these. The whole point of upgrading is speed, rigidity, or print quality that your current machine can't hit. This doesn't clear that bar.
No active heated chamber or a hot end that tops out below 280°C means no reliable ABS, ASA, nylon or PC. Fine for a hobbyist, wrong tool for commercial work in engineering materials.
Verdicts are rule-driven from the spec sheet and current price (€200). They don't capture firmware polish, support quality, or reliability - so treat them as a sanity check, not a final answer.
Live offers
Every live listing on the English-language Amazon marketplaces that I've matched to this printer. Cheapest first. Affiliate links.
- 🇫🇷 Imprimante 3D GIANTARM M1, Mini-imprimante 3D à nivellement Automatique pour débutants, extrudeuse à entraînement Direct, Vitesse d'impression 250 mm/s, Dimensions d'impression 100 x 110 x 100 mmAmazon.fr · New€199.99View
- 🇪🇸 Impresora 3D GIANTARM GEEETECH M1S con Wi-Fi, Control Inteligente y Pantalla a Color. Miniimpresora 3D para Principiantes, extrusor de accionamiento Directo y Velocidad de impresión 250 mm/s más.Amazon.es · New€239.99View
- 🇮🇹 GIANTARM GEEETECH M1S Stampante 3D Wi-Fi, controllo intelligente e display a colori. Mini stampante 3D per principianti, estrusore ad azionamento diretto, velocità di stampa più veloce di 250 mm/s.Amazon.it · New€259.00View
- 🇸🇪 GIANTARM M1 3D-skrivare, miniautomatisk utjämnande 3D-skrivare för nybörjare, direktdrivning extruder, 250 mm/s utskriftshastighet, utskriftsmått 100 x 110 x 100 mmAmazon.se · Newkr2990.99View
Close alternatives - what $200 gets you elsewhere
Think of this like the shopping-cart upsell: here's what a tenner more or less could buy you in roughly the same category. Same FDM tech, same marketplace, all prices live. Stretches are data-driven; they're not sponsored placements.
Save the money, same build volume at 3.4 L. You'd give up: nothing obvious on the spec sheet.
Get: 11.6 L more build volume (11.6 L) · 300°C hot end (was —°C).
Get: 3.4 L more build volume (3.4 L).
Frequently asked
What materials can the GIANTARM Imprimante 3D GIANTARM M1 print? +
At €200 the GIANTARM Imprimante 3D GIANTARM M1 realistically prints PLA and TPU. The listed°C hot end is too tight for PETG with confidence and rules out ABS/nylon entirely.
Does the GIANTARM Imprimante 3D GIANTARM M1 have auto-levelling? +
Yes - Automatic/Manual auto-levelling probe. Not quite as clean as load-cell or LiDAR, but reliable once calibrated and a world better than manual paper-under-the-nozzle.
Is the GIANTARM Imprimante 3D GIANTARM M1 worth €200? +
At €200 the GIANTARM Imprimante 3D GIANTARM M1 is in hobby-entry territory - low-risk way to try the hobby. Expect older motion systems and basic feature sets, but print quality will surprise people coming from five-year-old reviews.
