LK5 Pro 3D
Updated 16 October 2026 · Live prices updated daily
Buy on Amazon.it - €299.00 →Affiliate link. Price live from the marketplace, not cached.
At a glance
What this printer gets right and wrong
- ✓ 36.0 L build volume - room for helmets, large functional parts, bulk runs.
- ✓ Under €300 - low-risk way to get into 3D printing without regretting the spend.
- ! Open frame - PLA and PETG only, realistically. Forget ABS or nylon done properly.
Head-to-head spec + price table against the Longer LK5 Pro 3D. Verified printers on this marketplace only.
Sensible first-printer territory: priced where you can afford to get it wrong, with auto-levelling so the first layer isn't a ritual. You'll outgrow it in 18 months, which is fine.
Bedslinger with middling flow rate - you already have one of these. The whole point of upgrading is speed, rigidity, or print quality that your current machine can't hit. This doesn't clear that bar.
No active heated chamber or a hot end that tops out below 280°C means no reliable ABS, ASA, nylon or PC. Fine for a hobbyist, wrong tool for commercial work in engineering materials.
Verdicts are rule-driven from the spec sheet and current price (€299). They don't capture firmware polish, support quality, or reliability - so treat them as a sanity check, not a final answer.
Live offers
Every live listing on the English-language Amazon marketplaces that I've matched to this printer. Cheapest first. Affiliate links.
- 🇮🇹 LONGER LK5 Pro 3D, stampante 3D FDM con spazio di montaggio 30 × 30 × 40 cm, driver TMC2209, rilevamento dei filamenti e funzione resume, open source, 90% preassemblataAmazon.it · New€299.00View
- 🇮🇹 Longer Stampante 3D LK5 Pro completamente open source, grande stampante 3D con funzione di ripresa e scheda madre silenziosa, stampanti 3D FDM fai da te con grandi dimensioni di stampa 30 x 30 x 30 cmAmazon.it · New€351.38View
- 🇮🇹 LONGER 3D Stampante LK5 Pro, grande dimensione di 300*300*400mm, con schermo touchscreen da 4,3 pollici, open source, 3,5 volte più veloce, precisione di dettaglio di 0,1 mm, ideale per i principiantiAmazon.it · New€399.99View
Close alternatives - what €299 gets you elsewhere
Think of this like the shopping-cart upsell: here's what a tenner more or less could buy you in roughly the same category. Same FDM tech, same marketplace, all prices live. Stretches are data-driven; they're not sponsored placements.
Save the money, similar specs on paper. You'd give up: 36.0 L vs 1.7 L build volume.
Get: 300°C hot end (was —°C).
Get: 300°C hot end (was —°C).
Frequently asked
What materials can the Longer LK5 Pro 3D print? +
At €299 the Longer LK5 Pro 3D realistically prints PLA and TPU. The listed°C hot end is too tight for PETG with confidence and rules out ABS/nylon entirely.
How fast is the Longer LK5 Pro 3D? +
Advertised at 180 mm/s, but that is motion-system capability, not what the hot end can sustain. Expect real-world prints at 80-150 mm/s without quality collapse.
How big can I print on the Longer LK5 Pro 3D? +
300×300×400 mm (36.0 L). Big enough for helmets in one piece, full-scale cosplay props, or multiple medium parts in one run. Reliability starts mattering at this scale - a failed 20-hour print stings.
Is the Longer LK5 Pro 3D worth €299? +
€299 is the sweet spot tier. The Longer LK5 Pro 3D competes directly with the current Bambu A1, Creality K1 and Prusa Mini generation. Hardware-per-pound is tight here - the differentiator is usually software polish and ecosystem.
