900-0064A Composite Extruder
Updated 9 September 2026 · Live prices updated daily
Buy on Amazon.com - $369.99 →Affiliate link. Price live from the marketplace, not cached.
At a glance
What this printer gets right and wrong
- ✓ Active heated chamber - ABS, ASA, nylon and PC become realistic, not just wishful thinking.
- ! Nothing stands out as a clear weakness on the spec sheet - but spec sheets never capture firmware polish, customer support or long-term reliability. Read owner reports before committing.
Head-to-head spec + price table against the MakerBot 900-0064A Composite Extruder. Verified printers on this marketplace only.
Sensible first-printer territory: priced where you can afford to get it wrong, with auto-levelling so the first layer isn't a ritual. You'll outgrow it in 18 months, which is fine.
Bedslinger with middling flow rate - you already have one of these. The whole point of upgrading is speed, rigidity, or print quality that your current machine can't hit. This doesn't clear that bar.
No active heated chamber or a hot end that tops out below 280°C means no reliable ABS, ASA, nylon or PC. Fine for a hobbyist, wrong tool for commercial work in engineering materials.
Verdicts are rule-driven from the spec sheet and current price ($370). They don't capture firmware polish, support quality, or reliability - so treat them as a sanity check, not a final answer.
Live offers
Every live listing on the English-language Amazon marketplaces that I've matched to this printer. Cheapest first. Affiliate links.
- 🇺🇸 MakerBot 900-0064A Composite Extruder with Superior Nylon Carbon Fiber Parts for METHOD and METHOD X 3D PrintersAmazon.com · New$369.99View
Close alternatives - what $370 gets you elsewhere
Think of this like the shopping-cart upsell: here's what a tenner more or less could buy you in roughly the same category. Same FDM tech, same marketplace, all prices live. Stretches are data-driven; they're not sponsored placements.
Save the money, similar specs on paper. You'd give up: 6.9 L vs 1.3 L build volume, 260°C hot end vs undefined°C.
Get: 49.1 L more build volume (56.0 L) · 300°C hot end (was 260°C).
Get: 4.7 L more build volume (11.6 L) · 290°C hot end (was 260°C).
Frequently asked
What materials can the MakerBot 900-0064A Composite Extruder print? +
At $370 the MakerBot 900-0064A Composite Extruder can print ABS and ASA reliably thanks to the active heated chamber. Nylon is borderline at 260°C - fine for plain PA6, harder for glass or carbon-filled variants that want 280 °C+.
How fast is the MakerBot 900-0064A Composite Extruder? +
Advertised at 500 mm/s, but that is motion-system capability, not what the hot end can sustain. Expect real-world prints at 80-150 mm/s without quality collapse.
How big can I print on the MakerBot 900-0064A Composite Extruder? +
190×190×196 mm (6.9 L). Mainstream bed size - fits 90 % of what people actually print. Cosplay helmets will need to be sliced into sections.
Does the MakerBot 900-0064A Composite Extruder have auto-levelling? +
Yes - Automatic Z Calibration, Autom auto-levelling probe. Not quite as clean as load-cell or LiDAR, but reliable once calibrated and a world better than manual paper-under-the-nozzle.
Is the MakerBot 900-0064A Composite Extruder worth $370? +
$370 is the sweet spot tier. The MakerBot 900-0064A Composite Extruder competes directly with the current Bambu A1, Creality K1 and Prusa Mini generation. Hardware-per-pound is tight here - the differentiator is usually software polish and ecosystem.
