3D-Pioneer.com
3D-Pioneer.com

Find the best 3D printer for your money - specs vs. price, no marketing noise.

Best 3D printers with high-temp heated beds

Updated 26 September 2026 · Live prices updated daily

Printers whose heated bed clears 100 °C. Essential for reliable ABS, ASA and PA-CF adhesion without lifting corners.

  1. #1
    ELEGOO Centauri 2 3D-
    ELEGOO
    Centauri 2 3D-
    €400 CoreXY · 16.8 L · 350°C · Four-point auto leveling
  2. #2
    Creality K2 Pro 3D-
    Creality
    K2 Pro 3D-
    €1065 CoreXY · 27.0 L · 300°C · Smart Auto Leveling
  3. #3
    SEAFRONT App-bediening WiFi Mini 3D-
    SEAFRONT
    App-bediening WiFi Mini 3D-
    €406 CoreXY · 20.3 L · 300°C
  4. #4
    Creality K1C FDM 3D-
    Creality
    K1C FDM 3D-
    €494 CoreXY · 12.1 L · 300°C · Hands-free leveling
  5. #5
    FTVOGUE Ender-3 V3 KE 3D- Hoge Snelheid 500 Mm/s A
    FTVOGUE
    Ender-3 V3 KE 3D- Hoge Snelheid 500 Mm/s A
    €497 Bedslinger · 11.6 L · 300°C · CRTouch
  6. #6
    Creality K2 ? 3D- 260 x 260 x 260 mm 600 mmps CFS v
    Creality
    K2 ? 3D- 260 x 260 x 260 mm 600 mmps CFS v
    €684 CoreXY · 17.6 L · 300°C · Advanced/Auto
  7. #7
    Oreilet Nieuwe Hi 3D-
    Oreilet
    Nieuwe Hi 3D-
    €1006 Bedslinger · 20.3 L · 300°C · Full-auto leveling
  8. #8
    Creality K2 Pro 3D-
    Creality
    K2 Pro 3D-
    €967 CoreXY · 17.6 L · 300°C · Strain sensor
  9. #9
    FTVOGUE K2 Plus 3D- 16-kleuren Multifilamentprinte
    FTVOGUE
    K2 Plus 3D- 16-kleuren Multifilamentprinte
    €3567 CoreXY · 42.9 L · 350°C · Strain gauge

Matt's take

Bed temperature is the quiet spec that separates "can print ABS if you cross fingers" from "prints ABS reliably". Most PLA-focused machines top out at 70-80 °C because that is all PLA needs. ABS wants 100-110 °C, ASA similar, and filled nylons 90-110 °C. Without that bed heat, corners peel as the print cools and you end up running a brim or raft on every part. Pair with an active heated chamber for best results - bed heat alone helps but doesn't fully solve warp on tall ABS.

Frequently asked

Do I need a 100 °C heated bed? +

Only if you print ABS, ASA, or filled nylons. PLA and PETG are happy at 60-80 °C. If you never leave PLA territory, a high-temp bed is unused capability.

Why does bed temperature matter for ABS? +

ABS shrinks as it cools from its 100 °C+ print temperature. A hot bed keeps the bottom layers near glass transition, so the shrink happens gradually rather than snapping the print off the plate at hour three.

Is a garolite/FR4 bed surface different from PEI? +

Garolite is the de-facto surface for nylon because nylon refuses to stick to PEI. If you plan to print nylon, check that the printer either ships a garolite plate or accepts a swap-in one. Otherwise it is an extra £30 and often an extra week's wait.

Other shortlists
for ABS, ASA and nylon large-format 3D printers CoreXY 3D printers for beginners Quietest 3D printers - flat and studio friendly multi-colour and multi-material 3D printers for tabletop miniatures for schools and classrooms with remote monitoring Fastest 3D printers (by real volumetric flow) compact 3D printers (small desks, small spaces) for cosplay and props

Related reading

Long readIs an enclosed 3D printer worth it?When the enclosure premium actually pays back - and when it is money wasted on PLA.Read →Long readHow to pick your first 3D printerSpec by spec, what actually matters on a first printer and what the marketing hopes you will not question.Read →

Ranking is spec-driven. It favours printers that objectively have the capabilities this shortlist targets. Firmware, support quality and long-term reliability aren't on the spec sheet - read the full printer page and owner reports before committing.