Anet

ET4X

£209.00 cheapest of 2 live offers

Updated 10 September 2026 · Live prices updated daily

Buy on Amazon.co.uk - £209.00 →

Affiliate link. Price live from the marketplace, not cached.

At a glance

Technology FDM

Build volume 220×220×250 mm (12.1 L)

Extruders 1

Frame Aluminum

What it gets right

✓ Under £300 - low-risk way to get into 3D printing without regretting the spend.

Where it falls short

! Nothing stands out as a clear weakness on the spec sheet - but spec sheets never capture firmware polish, customer support or long-term reliability. Read owner reports before committing.

Compare this with another printer

Head-to-head spec + price table against the Anet ET4X. Verified printers on this marketplace only.

Who this is for

Buying your first printer

Sensible first-printer territory: priced where you can afford to get it wrong, with auto-levelling so the first layer isn't a ritual. You'll outgrow it in 18 months, which is fine.

Upgrading from an Ender or old Prusa

Bedslinger with middling flow rate - you already have one of these. The whole point of upgrading is speed, rigidity, or print quality that your current machine can't hit. This doesn't clear that bar.

Workshop or small business

No active heated chamber or a hot end that tops out below 280°C means no reliable ABS, ASA, nylon or PC. Fine for a hobbyist, wrong tool for commercial work in engineering materials.

Verdicts are rule-driven from the spec sheet and current price (£209). They don't capture firmware polish, support quality, or reliability - so treat them as a sanity check, not a final answer.

Live offers

Every live listing on the English-language Amazon marketplaces that I've matched to this printer. Cheapest first. Affiliate links.

🇬🇧

Anet ET4X DIY 3D Printer, All Metal Frame 3D Printer, Resume Printing, Online & Offline Print, 2.8 Inch Intutive Touch Screen, 220X220X250mm

Amazon.co.uk · New

£209.00
View
🇪🇸

Anet ET4X - Impresora 3D de bricolaje, impresora 3D con marco de metal, reanudar la impresión, impresión en línea y fuera de línea, pantalla táctil intutiva de 2,8 pulgadas, 220 x 220 x 250 mm

Amazon.es · New

€229.00
View

Close alternatives - what $209 gets you elsewhere

Think of this like the shopping-cart upsell: here's what a tenner more or less could buy you in roughly the same category. Same FDM tech, same marketplace, all prices live. Stretches are data-driven; they're not sponsored placements.

Save the money, similar specs on paper. You'd give up: 12.1 L vs 1.1 L build volume.

Get: 260°C hot end (was —°C).

Get: 4.7 L more build volume (16.8 L) · 350°C hot end (was —°C).

Open page →

Frequently asked

What materials can the Anet ET4X print? +

At £209 the Anet ET4X realistically prints PLA and TPU. The listed°C hot end is too tight for PETG with confidence and rules out ABS/nylon entirely.

How big can I print on the Anet ET4X? +

220×220×250 mm (12.1 L). Comfortable for medium props, functional parts up to ~25 cm, and batch printing. One of the most-used working sizes in hobby 3D printing.

Is the Anet ET4X worth £209? +

£209 is the sweet spot tier. The Anet ET4X competes directly with the current Bambu A1, Creality K1 and Prusa Mini generation. Hardware-per-pound is tight here - the differentiator is usually software polish and ecosystem.

Long readHow to pick your first 3D printerSpec by spec, what actually matters on a first printer and what the marketing hopes you will not question.Read →Long readFDM vs resin 3D printingWhen each process wins, where each fails, and why most beginners should start with FDM.Read →

Prices are live from the marketplace and refresh on every page load. I earn a small commission on purchases made through the affiliate links above - it costs you nothing and keeps the data-gathering running. I never accept free hardware.

At a glance

What this printer gets right and wrong

Live offers

Close alternatives - what $209 gets you elsewhere

Frequently asked

Related reading