3D-Pioneer.com
3D-Pioneer.com

Find the best 3D printer for your money - specs vs. price, no marketing noise.
AnkerMake Drukarka 3D AnkerMake M5C
AnkerMake

Drukarka 3D AnkerMake M5C

€354.12 cheapest of 6 live offers

Updated 26 September 2026 · Live prices updated daily

Buy on Amazon.it - €354.12 →

Affiliate link. Price live from the marketplace, not cached.

At a glance

Technology FDM
Build volume 220×220×250 mm (12.1 L)
Kinematics Cartesian
Max print speed 500 mm/s
Max hot-end temp 300 °C
Nozzle diameter 0.4 mm
Extruders 1
Enclosure Open
Auto-levelling Automatic
Features Wi-Fi, Filament runout sensor

What this printer gets right and wrong

What it gets right
  • ✓ 300°C hot end - handles carbon-fibre nylons and PC, not just the easy stuff.
Where it falls short
  • ! Open frame - PLA and PETG only, realistically. Forget ABS or nylon done properly.
Compare this with another printer

Head-to-head spec + price table against the AnkerMake Drukarka 3D AnkerMake M5C. Verified printers on this marketplace only.
Who this is for
Buying your first printer

Sensible first-printer territory: priced where you can afford to get it wrong, with auto-levelling so the first layer isn't a ritual. You'll outgrow it in 18 months, which is fine.

Upgrading from an Ender or old Prusa

Bedslinger with middling flow rate - you already have one of these. The whole point of upgrading is speed, rigidity, or print quality that your current machine can't hit. This doesn't clear that bar.

Workshop or small business

No active heated chamber or a hot end that tops out below 280°C means no reliable ABS, ASA, nylon or PC. Fine for a hobbyist, wrong tool for commercial work in engineering materials.

Verdicts are rule-driven from the spec sheet and current price (€354). They don't capture firmware polish, support quality, or reliability - so treat them as a sanity check, not a final answer.

Live offers

Every live listing on the English-language Amazon marketplaces that I've matched to this printer. Cheapest first. Affiliate links.

  • 🇮🇹
    Drukarka 3D AnkerMake M5C
    Amazon.it · Used
    €354.12
    View
  • 🇮🇹
    Drukarka 3D AnkerMake M5C
    Amazon.it · New
    €365.00
    View
  • 🇫🇷
    Imprimante 3D AnkerMake M5, 3D FDM, Intelligente et 5X Plus Rapide, Temps gagné 70%, détails de 0,1 mm, Surveillance par IA intégrée, Auto-Mise à Niveau, Alliage d’alu moulé sous Pression intégré
    Amazon.fr · New
    €676.57
    View
  • 🇮🇹
    AnkerMake M5 Stampante 3D FDM, 5 Volte Più Veloce ed Extra Intelligente, Riduzione dei Tempi di Stampa del 70%, Dettagli Uniformi di 0,1 mm, Monitoraggio della Telecamera AI Integrato
    Amazon.it · New
    €721.86
    View
  • 🇪🇸
    Impresora 3D AnkerMake M5, Impresora 3D FDM, 5 Veces más rápida y ultrainteligente, Reduce el Tiempo de impresión en un 70%, Detalles precisos de 0,1 mm, Control de cámara incorporada con IA
    Amazon.es · New
    €790.76
    View
  • 🇬🇧
    AnkerMake M5 3D Printer, High-Speed, Speed Upgraded to 500 mm/s, Fast Mode, Smooth Detail, Easy to Use for Beginners, Error Detection with AI Camera, Auto-Leveling, Integrated Die-Cast Aluminum Alloy
    Amazon.co.uk · New
    £923.29
    View

Close alternatives - what $354 gets you elsewhere

Think of this like the shopping-cart upsell: here's what a tenner more or less could buy you in roughly the same category. Same FDM tech, same marketplace, all prices live. Stretches are data-driven; they're not sponsored placements.

Spend less
ANYCUBIC Kobra X
ANYCUBIC
Kobra X
$330 (-$24)

Save the money, same build volume at 17.6 L. You'd give up: nothing obvious on the spec sheet.

Open page →
Stretch the budget
Creality Ender 3 V3 Plus
Creality
Ender 3 V3 Plus
$375 (+$21)

Get: 17.6 L more build volume (29.7 L).

Open page →
Size up
ANYCUBIC （） Anycubic Kobra 3 Max
ANYCUBIC
（） Anycubic Kobra 3 Max
$464 (+$110)

Get: 76.1 L more build volume (88.2 L).

Open page →

Frequently asked

What materials can the AnkerMake Drukarka 3D AnkerMake M5C print? +

At €354 the AnkerMake Drukarka 3D AnkerMake M5C has the hot end for engineering materials (300°C) but no active chamber, so ABS and nylon will warp on anything larger than a phone case. Treat it as a PLA/PETG/TPU workhorse with headroom for the occasional small ABS part.

How fast is the AnkerMake Drukarka 3D AnkerMake M5C? +

Advertised at 500 mm/s, but that is motion-system capability, not what the hot end can sustain. Expect real-world prints at 80-150 mm/s without quality collapse.

How big can I print on the AnkerMake Drukarka 3D AnkerMake M5C? +

220×220×250 mm (12.1 L). Comfortable for medium props, functional parts up to ~25 cm, and batch printing. One of the most-used working sizes in hobby 3D printing.

Does the AnkerMake Drukarka 3D AnkerMake M5C have auto-levelling? +

Yes - Automatic auto-levelling probe. Not quite as clean as load-cell or LiDAR, but reliable once calibrated and a world better than manual paper-under-the-nozzle.

Is the AnkerMake Drukarka 3D AnkerMake M5C worth €354? +

€354 is the sweet spot tier. The AnkerMake Drukarka 3D AnkerMake M5C competes directly with the current Bambu A1, Creality K1 and Prusa Mini generation. Hardware-per-pound is tight here - the differentiator is usually software polish and ecosystem.

Related reading

Long readHow to pick your first 3D printerSpec by spec, what actually matters on a first printer and what the marketing hopes you will not question.Read →Long readFDM vs resin 3D printingWhen each process wins, where each fails, and why most beginners should start with FDM.Read →
Prices are live from the marketplace and refresh on every page load. I earn a small commission on purchases made through the affiliate links above - it costs you nothing and keeps the data-gathering running. I never accept free hardware.
Buy on Amazon.it €354.12 →