X-Maker Impresora 3D con Aplicación de Diseño
Updated 15 October 2026 · Live prices updated daily
Buy on Amazon.es - €343.33 →Affiliate link. Price live from the marketplace, not cached.
At a glance
What this printer gets right and wrong
Nothing jumps out on the spec sheet as a standout feature at this price.
- ! 3.4 L build volume - fine for calibration prints and small parts, awkward for anything bigger than a mug.
Head-to-head spec + price table against the AOSEED X-Maker Impresora 3D con Aplicación de Diseño. Verified printers on this marketplace only.
Sensible first-printer territory: priced where you can afford to get it wrong, with auto-levelling so the first layer isn't a ritual. You'll outgrow it in 18 months, which is fine.
Bedslinger with middling flow rate - you already have one of these. The whole point of upgrading is speed, rigidity, or print quality that your current machine can't hit. This doesn't clear that bar.
No active heated chamber or a hot end that tops out below 280°C means no reliable ABS, ASA, nylon or PC. Fine for a hobbyist, wrong tool for commercial work in engineering materials.
Verdicts are rule-driven from the spec sheet and current price (€343). They don't capture firmware polish, support quality, or reliability - so treat them as a sanity check, not a final answer.
Live offers
Every live listing on the English-language Amazon marketplaces that I've matched to this printer. Cheapest first. Affiliate links.
- 🇪🇸 X-Maker Impresora 3D con Aplicación de Diseño, Aplicación de Diseño AI, Gran Biblioteca de Juguetes, con 15 Mini Módulos de Diseño 3D, Adecuado para Uso Escolar y HogarAmazon.es · New€343.33View
- 🇩🇪 X-Maker 3D-Drucker mit Design-App, Vollständig Geschlossen, WLAN-Druck, 12,000+ 3D-Spielzeugvorlagen mit Updates, 15+ 3D-Designmodule, Sofort EinsatzbereitAmazon.de · New€347.99View
- 🇩🇪 X-Maker 3D-Drucker mit Design-App - Vollständig geschlossen, KI Design-App, umfangreiche Sammlung an 3D-Spielzeugvorlagen, mit 15 Mini-3D- Designmodulen, schneller DüsenwechselAmazon.de · New€357.91View
- 🇪🇸 X-Maker Impresora 3D con aplicación de diseño - Totalmente Cerrada, aplicación de diseño de IA, Amplia colección de Plantillas de Juguetes 3D, con más de 15 módulos de diseño 3DAmazon.es · New€366.76View
- 🇬🇧 X-MAKER 3D Printer with 8 PLA Filament Set, Beginner-Friendly Design Apps, Fully Enclosed, Creation Courses, and Ideal for Schools and Households, Wi-Fi Printing, Resume Printing, Silent PrintingAmazon.co.uk · New£370.99View
- 🇩🇪 X-Maker 3D-Drucker mit 8 PLA-Filamenten, Design-App, Vollständig Geschlossen, WLAN-Druck, 12,000+ 3D-Spielzeugvorlagen mit Updates, 15+ 3D-Designmodule, Sofort EinsatzbereitAmazon.de · New€379.99View
- 🇮🇹 Stampante 3D X-Maker con App di Design - Completamente chiusa, App di Design AI, vasta collezione di modelli di giocattoli 3D, con 15 mini moduli di design 3D, rapido cambio dell'ugelloAmazon.it · New€384.58View
- 🇪🇸 Impresora 3D X-Maker con aplicación de diseño - Aplicación de diseño de IA Completamente Cerrada, Amplia colección de Plantillas de Juguetes 3DAmazon.es · New€399.99View
- 🇪🇸 X-Maker - Impresora 3D con aplicación de diseño, totalmente cerrada, aplicación de diseño de IA, amplia colección de plantillas de juguetes 3D, con más de 15 módulos de diseño mini 3D, cambio rápidoAmazon.es · New€423.43View
- 🇩🇪 AOSEED X-Maker AI 3D-Drucker für Anfänger, Vollständig Geschlossen & Geräuscharm, KI-Design-App, 12000+ 3D-Modelle, WLAN-Verbindung, Sofort Einsatzbereit, inkl. 8-teiligem PLA-Filament-SetAmazon.de · New€470.58View
Close alternatives - what $343 gets you elsewhere
Think of this like the shopping-cart upsell: here's what a tenner more or less could buy you in roughly the same category. Same FDM tech, same marketplace, all prices live. Stretches are data-driven; they're not sponsored placements.
Save the money, same build volume at 36.0 L. You'd give up: nothing obvious on the spec sheet.
Get: 13.4 L more build volume (16.8 L) · 350°C hot end (was —°C).
Get: 12.3 L more build volume (15.6 L) · 320°C hot end (was —°C).
Frequently asked
What materials can the AOSEED X-Maker Impresora 3D con Aplicación de Diseño print? +
At €343 the AOSEED X-Maker Impresora 3D con Aplicación de Diseño realistically prints PLA and TPU. The listed°C hot end is too tight for PETG with confidence and rules out ABS/nylon entirely.
How fast is the AOSEED X-Maker Impresora 3D con Aplicación de Diseño? +
Advertised at 300 mm/s, but that is motion-system capability, not what the hot end can sustain. Expect real-world prints at 80-150 mm/s without quality collapse.
How big can I print on the AOSEED X-Maker Impresora 3D con Aplicación de Diseño? +
150×150×150 mm (3.4 L). Small build area. Fine for calibration prints, minis, keychains, small functional parts. Awkward for anything bigger than a coffee mug.
Is the AOSEED X-Maker Impresora 3D con Aplicación de Diseño worth €343? +
€343 is the sweet spot tier. The AOSEED X-Maker Impresora 3D con Aplicación de Diseño competes directly with the current Bambu A1, Creality K1 and Prusa Mini generation. Hardware-per-pound is tight here - the differentiator is usually software polish and ecosystem.
