Ender CR Touch Auto Bed Leveling Sensor Compatible
Updated 28 October 2026 · Live prices updated daily
Buy on Amazon.co.uk - £633.65 →Affiliate link. Price live from the marketplace, not cached.
At a glance
What this printer gets right and wrong
- ✓ 30.6 L build volume - room for helmets, large functional parts, bulk runs.
- ! Bedslinger design - expect ringing artefacts on tall prints at speed.
- ! Open frame - PLA and PETG only, realistically. Forget ABS or nylon done properly.
- ! Manual levelling - plan a weekend of paper-under-the-nozzle rituals before your first clean first layer.
Head-to-head spec + price table against the Creality Ender CR Touch Auto Bed Leveling Sensor Compatible. Verified printers on this marketplace only.
At this price you're well past the sweet spot for a first printer. There's no shame in starting with something cheaper - you'll learn more on a 200-400 machine and have money left for filament.
Bedslinger with middling flow rate - you already have one of these. The whole point of upgrading is speed, rigidity, or print quality that your current machine can't hit. This doesn't clear that bar.
No active heated chamber or a hot end that tops out below 280°C means no reliable ABS, ASA, nylon or PC. Fine for a hobbyist, wrong tool for commercial work in engineering materials.
Verdicts are rule-driven from the spec sheet and current price (£634). They don't capture firmware polish, support quality, or reliability - so treat them as a sanity check, not a final answer.
Live offers
Every live listing on the English-language Amazon marketplaces that I've matched to this printer. Cheapest first. Affiliate links.
- 🇬🇧 Creality Ender CR Touch Auto Bed Leveling Sensor Kit Compatible with Ender 3 V2/Ender 3 Pro/Ender 3/Ender 3 Max/Ender 5/Ender 5Pro, which is specifically designed for 3D printer.Amazon.co.uk · New£633.65View
Close alternatives - what $634 gets you elsewhere
Think of this like the shopping-cart upsell: here's what a tenner more or less could buy you in roughly the same category. Same FDM tech, same marketplace, all prices live. Stretches are data-driven; they're not sponsored placements.
Save the money, similar specs on paper. You'd give up: 30.6 L vs 17.6 L build volume.
Get: 57.6 L more build volume (88.2 L) · 350°C hot end (was 260°C).
Get: 320°C hot end (was 260°C) · a proper heated chamber, so ABS/ASA/nylon become realistic.
Frequently asked
What materials can the Creality Ender CR Touch Auto Bed Leveling Sensor Compatible print? +
At £634 the Creality Ender CR Touch Auto Bed Leveling Sensor Compatible is a PLA, PETG, TPU machine. The 260°C hot end covers PETG with a small safety margin. ABS and nylon need an enclosure plus more heat - not this printer.
How fast is the Creality Ender CR Touch Auto Bed Leveling Sensor Compatible? +
Advertised at 150 mm/s, but that is motion-system capability, not what the hot end can sustain. Expect real-world prints at 80-150 mm/s without quality collapse.
How big can I print on the Creality Ender CR Touch Auto Bed Leveling Sensor Compatible? +
300×300×340 mm (30.6 L). Big enough for helmets in one piece, full-scale cosplay props, or multiple medium parts in one run. Reliability starts mattering at this scale - a failed 20-hour print stings.
Does the Creality Ender CR Touch Auto Bed Leveling Sensor Compatible have auto-levelling? +
No - manual levelling only. Plan a weekend tuning the bed with a piece of paper and a hex key before your first clean first layer. At this price in 2026, that is a real drawback.
Is the Creality Ender CR Touch Auto Bed Leveling Sensor Compatible worth £634? +
£634 is serious hobbyist territory. For the Creality Ender CR Touch Auto Bed Leveling Sensor Compatible to justify this over a $500 machine it needs to deliver genuine speed (volumetric flow), reliability at speed, or access to engineering materials. Check the spec table above against those three.
