V400 Max High-Speed Large
Updated 26 September 2026 · Live prices updated daily
Buy on Amazon.ca - $1999.00 →Affiliate link. Price live from the marketplace, not cached.
At a glance
What this printer gets right and wrong
- ✓ 36.9 L build volume - room for helmets, large functional parts, bulk runs.
- ! Open frame - PLA and PETG only, realistically. Forget ABS or nylon done properly.
- ! Max hot-end temp only 240°C - PLA-dominant territory, no PETG with any safety margin.
- ! Over $1,500 - you are paying for polish and ecosystem, not raw capability. Cheaper machines match the hardware on paper.
Head-to-head spec + price table against the FLSUN V400 Max High-Speed Large. Verified printers on this marketplace only.
At this price you're well past the sweet spot for a first printer. There's no shame in starting with something cheaper - you'll learn more on a 200-400 machine and have money left for filament.
Bedslinger with middling flow rate - you already have one of these. The whole point of upgrading is speed, rigidity, or print quality that your current machine can't hit. This doesn't clear that bar.
No active heated chamber or a hot end that tops out below 280°C means no reliable ABS, ASA, nylon or PC. Fine for a hobbyist, wrong tool for commercial work in engineering materials.
Verdicts are rule-driven from the spec sheet and current price ($1999). They don't capture firmware polish, support quality, or reliability - so treat them as a sanity check, not a final answer.
Live offers
Every live listing on the English-language Amazon marketplaces that I've matched to this printer. Cheapest first. Affiliate links.
- 🇨🇦 FLSUN V400 Max High-Speed Large 3D Printer with Massive Φ500*550mm Size, 600mm/s Print Speed, Auto Leveling, for Cosplay, Prototypes and Big ModelsAmazon.ca · New$1999.00View
Close alternatives - what $1999 gets you elsewhere
Think of this like the shopping-cart upsell: here's what a tenner more or less could buy you in roughly the same category. Same FDM tech, same marketplace, all prices live. Stretches are data-driven; they're not sponsored placements.
Save the money, similar specs on paper. You'd give up: 36.9 L vs 11.6 L build volume.
Get: 300°C hot end (was 240°C).
Modest upgrade on the spec sheet.
Frequently asked
What materials can the FLSUN V400 Max High-Speed Large print? +
At $1999 the FLSUN V400 Max High-Speed Large realistically prints PLA and TPU. The 240°C hot end is too tight for PETG with confidence and rules out ABS/nylon entirely.
How fast is the FLSUN V400 Max High-Speed Large? +
Advertised at 400 mm/s, but that is motion-system capability, not what the hot end can sustain. Expect real-world prints at 80-150 mm/s without quality collapse.
How big can I print on the FLSUN V400 Max High-Speed Large? +
300×300×410 mm (36.9 L). Big enough for helmets in one piece, full-scale cosplay props, or multiple medium parts in one run. Reliability starts mattering at this scale - a failed 20-hour print stings.
Does the FLSUN V400 Max High-Speed Large have auto-levelling? +
Yes - Automatic auto-levelling probe. Not quite as clean as load-cell or LiDAR, but reliable once calibrated and a world better than manual paper-under-the-nozzle.
Is the FLSUN V400 Max High-Speed Large worth $1999? +
$1999+ is prosumer/workshop money. Diminishing returns on print quality versus a $700-1000 machine; real returns on long-term reliability, support contracts and replacement parts. Worth it if the printer makes you money, overkill if it is a weekend hobby.
