0
Updated 20 October 2026 · Live prices updated daily
Buy on Amazon.se - kr369.99 →Affiliate link. Price live from the marketplace, not cached.
At a glance
What this printer gets right and wrong
- ✓ CoreXY motion system - faster and more rigid than a bedslinger, especially on tall prints.
- ! Nothing stands out as a clear weakness on the spec sheet - but spec sheets never capture firmware polish, customer support or long-term reliability. Read owner reports before committing.
Head-to-head spec + price table against the IdeaFormer 0. Verified printers on this marketplace only.
Sensible first-printer territory: priced where you can afford to get it wrong, with auto-levelling so the first layer isn't a ritual. You'll outgrow it in 18 months, which is fine.
This is the kind of move that makes you wonder why you put up with your old machine for so long. Faster, more rigid, and the first layer stops being a gamble.
No active heated chamber or a hot end that tops out below 280°C means no reliable ABS, ASA, nylon or PC. Fine for a hobbyist, wrong tool for commercial work in engineering materials.
Verdicts are rule-driven from the spec sheet and current price (kr370). They don't capture firmware polish, support quality, or reliability - so treat them as a sanity check, not a final answer.
Live offers
Every live listing on the English-language Amazon marketplaces that I've matched to this printer. Cheapest first. Affiliate links.
- 🇸🇪 IdeaFormer 0,4 mm IR3 V2 Extruder Hotend-set, 24V 80W Original Direct Drive Extruder för transportband 3D-skrivare IR3 V2Amazon.se · Newkr369.99View
- 🇬🇧 deaFormer IR3 V2 Conveyor Belt 3D Printer, Infinite Z-Axis, CoreXY, 400mm/sAmazon.co.uk · New£856.99View
- 🇪🇸 IdeaFormer IR3 V2 Impresora 3D cinta transportadora 250 × 250 × ∞ mm Infinito Z metal pila 400 mm/sAmazon.es · New€969.99View
Close alternatives - what $370 gets you elsewhere
Think of this like the shopping-cart upsell: here's what a tenner more or less could buy you in roughly the same category. Same FDM tech, same marketplace, all prices live. Stretches are data-driven; they're not sponsored placements.
Save the money, same build volume at 10.6 L. You'd give up: nothing obvious on the spec sheet.
Get: 16.8 L more build volume (16.8 L) · 300°C hot end (was 290°C).
Get: 17.6 L more build volume (17.6 L) · 300°C hot end (was 290°C).
Frequently asked
What materials can the IdeaFormer 0 print? +
At kr370 the IdeaFormer 0 has the hot end for engineering materials (290°C) but no active chamber, so ABS and nylon will warp on anything larger than a phone case. Treat it as a PLA/PETG/TPU workhorse with headroom for the occasional small ABS part.
How fast is the IdeaFormer 0? +
Advertised at 300 mm/s, but that is motion-system capability, not what the hot end can sustain. Expect real-world prints at 80-150 mm/s without quality collapse.
Is the IdeaFormer 0 worth kr370? +
kr370 is the sweet spot tier. The IdeaFormer 0 competes directly with the current Bambu A1, Creality K1 and Prusa Mini generation. Hardware-per-pound is tight here - the differentiator is usually software polish and ecosystem.
