Imprimante 3D Officielle Creality K2 Pro
Updated 22 October 2026 · Live prices updated daily
Buy on Amazon.fr - €1126.89 →Affiliate link. Price live from the marketplace, not cached.
At a glance
What this printer gets right and wrong
- ✓ 300°C hot end - handles carbon-fibre nylons and PC, not just the easy stuff.
- ✓ 27.0 L build volume - room for helmets, large functional parts, bulk runs.
- ! Nothing stands out as a clear weakness on the spec sheet - but spec sheets never capture firmware polish, customer support or long-term reliability. Read owner reports before committing.
Head-to-head spec + price table against the Comgrow Imprimante 3D Officielle Creality K2 Pro. Verified printers on this marketplace only.
At this price you're well past the sweet spot for a first printer. There's no shame in starting with something cheaper - you'll learn more on a 200-400 machine and have money left for filament.
Bedslinger with middling flow rate - you already have one of these. The whole point of upgrading is speed, rigidity, or print quality that your current machine can't hit. This doesn't clear that bar.
No active heated chamber or a hot end that tops out below 280°C means no reliable ABS, ASA, nylon or PC. Fine for a hobbyist, wrong tool for commercial work in engineering materials.
Verdicts are rule-driven from the spec sheet and current price (€1127). They don't capture firmware polish, support quality, or reliability - so treat them as a sanity check, not a final answer.
Live offers
Every live listing on the English-language Amazon marketplaces that I've matched to this printer. Cheapest first. Affiliate links.
- 🇫🇷 Imprimante 3D Officielle Creality K2 Pro Combo, imprimantes 3D Multicolores avec CFS, Vitesse d'impression de 600 mm/s, extrudeuse à entraînement Direct 300 ℃, Chambre chauffante, Deux caméras IAAmazon.fr · New€1126.89View
- 🇪🇸 Creality K2 Pro Combo Impresora 3D Oficial | Multicolor con CFS, 600 mm/s, 300 °C, Accionamiento Directo, Calefacción de Cámara, Tamaño 11,81x11,81x11,81 PulgadasAmazon.es · New€1137.87View
- 🇮🇹 Creality K2 Pro Combo Stampante 3D Ufficiale | Multicolore con CFS, 600 mm/s, 300 °C, Trasmissione Diretta, Riscaldamento Camera, Dimensione 11,81x11,81x11,81 PolliciAmazon.it · New€1148.89View
Close alternatives - what $1127 gets you elsewhere
Think of this like the shopping-cart upsell: here's what a tenner more or less could buy you in roughly the same category. Same FDM tech, same marketplace, all prices live. Stretches are data-driven; they're not sponsored placements.
Save the money, same build volume at 42.9 L. You'd give up: nothing obvious on the spec sheet.
Get: 15.9 L more build volume (42.9 L) · 350°C hot end (was 300°C).
Get: 98.0 L more build volume (125.0 L) · CoreXY motion - faster, more rigid.
Frequently asked
What materials can the Comgrow Imprimante 3D Officielle Creality K2 Pro print? +
At €1127 the Comgrow Imprimante 3D Officielle Creality K2 Pro has the hot end for engineering materials (300°C) but no active chamber, so ABS and nylon will warp on anything larger than a phone case. Treat it as a PLA/PETG/TPU workhorse with headroom for the occasional small ABS part.
How fast is the Comgrow Imprimante 3D Officielle Creality K2 Pro? +
Advertised at 600 mm/s, but that is motion-system capability, not what the hot end can sustain. Expect real-world prints at 80-150 mm/s without quality collapse.
How big can I print on the Comgrow Imprimante 3D Officielle Creality K2 Pro? +
300×300×300 mm (27.0 L). Big enough for helmets in one piece, full-scale cosplay props, or multiple medium parts in one run. Reliability starts mattering at this scale - a failed 20-hour print stings.
Does the Comgrow Imprimante 3D Officielle Creality K2 Pro have auto-levelling? +
Yes - Smart Auto Leveling auto-levelling probe. Not quite as clean as load-cell or LiDAR, but reliable once calibrated and a world better than manual paper-under-the-nozzle.
Is the Comgrow Imprimante 3D Officielle Creality K2 Pro worth €1127? +
€1127+ is prosumer/workshop money. Diminishing returns on print quality versus a $700-1000 machine; real returns on long-term reliability, support contracts and replacement parts. Worth it if the printer makes you money, overkill if it is a weekend hobby.
