Imprimante 3D Adventurer 5M Pro haute vitesse
Updated 26 September 2026 · Live prices updated daily
Buy on Amazon.fr - €780.99 →Affiliate link. Price live from the marketplace, not cached.
At a glance
What this printer gets right and wrong
- ✓ CoreXY motion system - faster and more rigid than a bedslinger, especially on tall prints.
- ✓ 32 mm³/s volumetric flow - genuinely fast, not just advertising-fast.
- ! Open frame - PLA and PETG only, realistically. Forget ABS or nylon done properly.
Head-to-head spec + price table against the GuliTech Imprimante 3D Adventurer 5M Pro haute vitesse. Verified printers on this marketplace only.
At this price you're well past the sweet spot for a first printer. There's no shame in starting with something cheaper - you'll learn more on a 200-400 machine and have money left for filament.
This is the kind of move that makes you wonder why you put up with your old machine for so long. Faster, more rigid, and the first layer stops being a gamble.
No active heated chamber or a hot end that tops out below 280°C means no reliable ABS, ASA, nylon or PC. Fine for a hobbyist, wrong tool for commercial work in engineering materials.
Verdicts are rule-driven from the spec sheet and current price (€781). They don't capture firmware polish, support quality, or reliability - so treat them as a sanity check, not a final answer.
Live offers
Every live listing on the English-language Amazon marketplaces that I've matched to this printer. Cheapest first. Affiliate links.
- 🇫🇷 Imprimante 3D Adventurer 5M Pro haute vitesse avec nivellement automatique complet, extrudeuse directe, arrêt automatique et caméra (Adventurer 5M Pro)Amazon.fr · New€780.99View
Close alternatives - what $781 gets you elsewhere
Think of this like the shopping-cart upsell: here's what a tenner more or less could buy you in roughly the same category. Same FDM tech, same marketplace, all prices live. Stretches are data-driven; they're not sponsored placements.
Save the money, same build volume at 16.8 L. You'd give up: nothing obvious on the spec sheet.
Get: 9.0 L more build volume (19.7 L) · 300°C hot end (was 280°C).
Get: 41.1 L more build volume (51.7 L) · 370°C hot end (was 280°C).
Frequently asked
What materials can the GuliTech Imprimante 3D Adventurer 5M Pro haute vitesse print? +
At €781 the GuliTech Imprimante 3D Adventurer 5M Pro haute vitesse has the hot end for engineering materials (280°C) but no active chamber, so ABS and nylon will warp on anything larger than a phone case. Treat it as a PLA/PETG/TPU workhorse with headroom for the occasional small ABS part.
How fast is the GuliTech Imprimante 3D Adventurer 5M Pro haute vitesse? +
Genuinely fast. Volumetric flow is 32 mm³/s, which means the hot end can melt plastic fast enough to keep up with the motion system. This is the tier where "500 mm/s" marketing claims translate into actual finished parts in half the time of a bedslinger.
How big can I print on the GuliTech Imprimante 3D Adventurer 5M Pro haute vitesse? +
220×220×220 mm (10.6 L). Comfortable for medium props, functional parts up to ~25 cm, and batch printing. One of the most-used working sizes in hobby 3D printing.
Does the GuliTech Imprimante 3D Adventurer 5M Pro haute vitesse have auto-levelling? +
Yes - Fully automatic bed leveling auto-levelling probe. Not quite as clean as load-cell or LiDAR, but reliable once calibrated and a world better than manual paper-under-the-nozzle.
Is the GuliTech Imprimante 3D Adventurer 5M Pro haute vitesse worth €781? +
€781 is serious hobbyist territory. For the GuliTech Imprimante 3D Adventurer 5M Pro haute vitesse to justify this over a $500 machine it needs to deliver genuine speed (volumetric flow), reliability at speed, or access to engineering materials. Check the spec table above against those three.
