Drukarka 3D
Updated 26 September 2026 · Live prices updated daily
Buy on Amazon.pl - zł585.09 →Affiliate link. Price live from the marketplace, not cached.
Specs shown are inferred from the listing, not yet hand-verified.
At a glance
What this printer gets right and wrong
Nothing jumps out on the spec sheet as a standout feature at this price.
- ! Nothing stands out as a clear weakness on the spec sheet - but spec sheets never capture firmware polish, customer support or long-term reliability. Read owner reports before committing.
Head-to-head spec + price table against the Hominas Drukarka 3D. Verified printers on this marketplace only.
Sensible first-printer territory: priced where you can afford to get it wrong, with auto-levelling so the first layer isn't a ritual. You'll outgrow it in 18 months, which is fine.
Bedslinger with middling flow rate - you already have one of these. The whole point of upgrading is speed, rigidity, or print quality that your current machine can't hit. This doesn't clear that bar.
No active heated chamber or a hot end that tops out below 280°C means no reliable ABS, ASA, nylon or PC. Fine for a hobbyist, wrong tool for commercial work in engineering materials.
Verdicts are rule-driven from the spec sheet and current price (zł585). They don't capture firmware polish, support quality, or reliability - so treat them as a sanity check, not a final answer.
Live offers
Every live listing on the English-language Amazon marketplaces that I've matched to this printer. Cheapest first. Affiliate links.
- 🇵🇱 Hominas Drukarka 3D, mini drukarka 3D dla początkujących, drukarka 3D z filamentem PLA, prędkość druku 10-40 mm/s, rozmiar druku 100 x 100 x 100 mmAmazon.pl · Newzł585.09View
Close alternatives - what $585 gets you elsewhere
Think of this like the shopping-cart upsell: here's what a tenner more or less could buy you in roughly the same category. Same printer tech, same marketplace, all prices live. Stretches are data-driven; they're not sponsored placements.
Save the money, same build volume at 0.0 L. You'd give up: nothing obvious on the spec sheet.
Get: 16.7 L more build volume (16.7 L).
Modest upgrade on the spec sheet.
Frequently asked
What materials can the Hominas Drukarka 3D print? +
At zł585 the Hominas Drukarka 3D realistically prints PLA and TPU. The listed°C hot end is too tight for PETG with confidence and rules out ABS/nylon entirely.
Is the Hominas Drukarka 3D worth zł585? +
zł585 is serious hobbyist territory. For the Hominas Drukarka 3D to justify this over a $500 machine it needs to deliver genuine speed (volumetric flow), reliability at speed, or access to engineering materials. Check the spec table above against those three.
