Ender-5 Hyper 3D Imprimante Prise en Charge de la
Updated 16 October 2026 · Live prices updated daily
Buy on Amazon.fr - €1856.19 →Affiliate link. Price live from the marketplace, not cached.
At a glance
What this printer gets right and wrong
Nothing jumps out on the spec sheet as a standout feature at this price.
- ! Bedslinger design - expect ringing artefacts on tall prints at speed.
- ! Over €1,500 - you are paying for polish and ecosystem, not raw capability. Cheaper machines match the hardware on paper.
Head-to-head spec + price table against the Kavolet Ender-5 Hyper 3D Imprimante Prise en Charge de la. Verified printers on this marketplace only.
At this price you're well past the sweet spot for a first printer. There's no shame in starting with something cheaper - you'll learn more on a 200-400 machine and have money left for filament.
Bedslinger with middling flow rate - you already have one of these. The whole point of upgrading is speed, rigidity, or print quality that your current machine can't hit. This doesn't clear that bar.
No active heated chamber or a hot end that tops out below 280°C means no reliable ABS, ASA, nylon or PC. Fine for a hobbyist, wrong tool for commercial work in engineering materials.
Verdicts are rule-driven from the spec sheet and current price (€1856). They don't capture firmware polish, support quality, or reliability - so treat them as a sanity check, not a final answer.
Live offers
Every live listing on the English-language Amazon marketplaces that I've matched to this printer. Cheapest first. Affiliate links.
- 🇫🇷 Kavolet Ender-5 Hyper 3D Imprimante Prise en Charge de la Connexion WLAN Adaptée aux Filaments de 1,75 Mm pour les Enfants et les Professionnels (Prise UE)Amazon.fr · New€1856.19View
Close alternatives - what $1856 gets you elsewhere
Think of this like the shopping-cart upsell: here's what a tenner more or less could buy you in roughly the same category. Same FDM tech, same marketplace, all prices live. Stretches are data-driven; they're not sponsored placements.
Save the money, same build volume at 8.0 L. You'd give up: nothing obvious on the spec sheet.
Get: 19.0 L more build volume (19.0 L) · 300°C hot end (was —°C).
Get: 8.2 L more build volume (8.2 L) · 250°C hot end (was —°C).
Frequently asked
What materials can the Kavolet Ender-5 Hyper 3D Imprimante Prise en Charge de la print? +
At €1856 the Kavolet Ender-5 Hyper 3D Imprimante Prise en Charge de la realistically prints PLA and TPU. The listed°C hot end is too tight for PETG with confidence and rules out ABS/nylon entirely.
Is the Kavolet Ender-5 Hyper 3D Imprimante Prise en Charge de la worth €1856? +
€1856+ is prosumer/workshop money. Diminishing returns on print quality versus a $700-1000 machine; real returns on long-term reliability, support contracts and replacement parts. Worth it if the printer makes you money, overkill if it is a weekend hobby.
