QIDI Q1 Pro
Updated 10 September 2026 · Live prices updated daily
Buy on Amazon.co.uk - £399.00 →Affiliate link. Price live from the marketplace, not cached.
At a glance
What this printer gets right and wrong
- ✓ CoreXY motion system - faster and more rigid than a bedslinger, especially on tall prints.
- ✓ 350°C hot end - handles carbon-fibre nylons and PC, not just the easy stuff.
- ! Nothing stands out as a clear weakness on the spec sheet - but spec sheets never capture firmware polish, customer support or long-term reliability. Read owner reports before committing.
Head-to-head spec + price table against the QIDI TECH QIDI Q1 Pro. Verified printers on this marketplace only.
Sensible first-printer territory: priced where you can afford to get it wrong, with auto-levelling so the first layer isn't a ritual. You'll outgrow it in 18 months, which is fine.
This is the kind of move that makes you wonder why you put up with your old machine for so long. Faster, more rigid, and the first layer stops being a gamble.
No active heated chamber or a hot end that tops out below 280°C means no reliable ABS, ASA, nylon or PC. Fine for a hobbyist, wrong tool for commercial work in engineering materials.
Verdicts are rule-driven from the spec sheet and current price (£399). They don't capture firmware polish, support quality, or reliability - so treat them as a sanity check, not a final answer.
Live offers
Every live listing on the English-language Amazon marketplaces that I've matched to this printer. Cheapest first. Affiliate links.
- 🇬🇧 QIDI Q1 Pro 3D Printer, Enclosed 3D Printer with Camera, Max 600mm/s High Speed, Fully Auto-Leveling & Auto-Calibration, 60℃ Chamber Heat, 350°C Hotend, Tangle Detection, Printing Size 245x245x240 mmAmazon.co.uk · New£399.00View
Close alternatives - what $399 gets you elsewhere
Think of this like the shopping-cart upsell: here's what a tenner more or less could buy you in roughly the same category. Same FDM tech, same marketplace, all prices live. Stretches are data-driven; they're not sponsored placements.
Save the money, similar specs on paper. You'd give up: 14.7 L vs 6.9 L build volume, 350°C hot end vs 260°C.
Get: 2.9 L more build volume (17.6 L).
Get: 4.0 L more build volume (18.7 L) · 370°C hot end (was 350°C).
Frequently asked
What materials can the QIDI TECH QIDI Q1 Pro print? +
At £399 the QIDI TECH QIDI Q1 Pro has the hot end for engineering materials (350°C) but no active chamber, so ABS and nylon will warp on anything larger than a phone case. Treat it as a PLA/PETG/TPU workhorse with headroom for the occasional small ABS part.
How fast is the QIDI TECH QIDI Q1 Pro? +
Advertised at 600 mm/s, but that is motion-system capability, not what the hot end can sustain. Expect real-world prints at 80-150 mm/s without quality collapse.
How big can I print on the QIDI TECH QIDI Q1 Pro? +
245×245×245 mm (14.7 L). Comfortable for medium props, functional parts up to ~25 cm, and batch printing. One of the most-used working sizes in hobby 3D printing.
Is the QIDI TECH QIDI Q1 Pro worth £399? +
£399 is the sweet spot tier. The QIDI TECH QIDI Q1 Pro competes directly with the current Bambu A1, Creality K1 and Prusa Mini generation. Hardware-per-pound is tight here - the differentiator is usually software polish and ecosystem.
