UP mini 3
Updated 9 September 2026 · Live prices updated daily
Buy on Amazon.com - $599.00 →Affiliate link. Price live from the marketplace, not cached.
At a glance
What this printer gets right and wrong
Nothing jumps out on the spec sheet as a standout feature at this price.
- ! Nothing stands out as a clear weakness on the spec sheet - but spec sheets never capture firmware polish, customer support or long-term reliability. Read owner reports before committing.
Head-to-head spec + price table against the Tiertime UP mini 3. Verified printers on this marketplace only.
Sensible first-printer territory: priced where you can afford to get it wrong, with auto-levelling so the first layer isn't a ritual. You'll outgrow it in 18 months, which is fine.
Bedslinger with middling flow rate - you already have one of these. The whole point of upgrading is speed, rigidity, or print quality that your current machine can't hit. This doesn't clear that bar.
No active heated chamber or a hot end that tops out below 280°C means no reliable ABS, ASA, nylon or PC. Fine for a hobbyist, wrong tool for commercial work in engineering materials.
Verdicts are rule-driven from the spec sheet and current price ($599). They don't capture firmware polish, support quality, or reliability - so treat them as a sanity check, not a final answer.
Live offers
Every live listing on the English-language Amazon marketplaces that I've matched to this printer. Cheapest first. Affiliate links.
- 🇺🇸 Tiertime UP mini 3 3D PrinterAmazon.com · New$599.00View
Close alternatives - what $599 gets you elsewhere
Think of this like the shopping-cart upsell: here's what a tenner more or less could buy you in roughly the same category. Same FDM tech, same marketplace, all prices live. Stretches are data-driven; they're not sponsored placements.
Save the money, same build volume at 16.8 L. You'd give up: nothing obvious on the spec sheet.
Get: 10.7 L more build volume (18.7 L) · 370°C hot end (was —°C).
Get: 22.7 L more build volume (30.7 L) · 370°C hot end (was —°C).
Frequently asked
What materials can the Tiertime UP mini 3 print? +
At $599 the Tiertime UP mini 3 realistically prints PLA and TPU. The listed°C hot end is too tight for PETG with confidence and rules out ABS/nylon entirely.
How big can I print on the Tiertime UP mini 3? +
200×200×200 mm (8.0 L). Mainstream bed size - fits 90 % of what people actually print. Cosplay helmets will need to be sliced into sections.
Does the Tiertime UP mini 3 have auto-levelling? +
Yes - True Touch 2.0 auto-levelling probe. Not quite as clean as load-cell or LiDAR, but reliable once calibrated and a world better than manual paper-under-the-nozzle.
Is the Tiertime UP mini 3 worth $599? +
$599 is serious hobbyist territory. For the Tiertime UP mini 3 to justify this over a $500 machine it needs to deliver genuine speed (volumetric flow), reliability at speed, or access to engineering materials. Check the spec table above against those three.
