Drukarka 3D AnkerMake M5C
Updated 26 September 2026 · Live prices updated daily
Buy on Amazon.it - €354.12 →Affiliate link. Price live from the marketplace, not cached.
At a glance
What this printer gets right and wrong
- ✓ 300°C hot end - handles carbon-fibre nylons and PC, not just the easy stuff.
- ! Open frame - PLA and PETG only, realistically. Forget ABS or nylon done properly.
Head-to-head spec + price table against the AnkerMake Drukarka 3D AnkerMake M5C. Verified printers on this marketplace only.
Sensible first-printer territory: priced where you can afford to get it wrong, with auto-levelling so the first layer isn't a ritual. You'll outgrow it in 18 months, which is fine.
Bedslinger with middling flow rate - you already have one of these. The whole point of upgrading is speed, rigidity, or print quality that your current machine can't hit. This doesn't clear that bar.
No active heated chamber or a hot end that tops out below 280°C means no reliable ABS, ASA, nylon or PC. Fine for a hobbyist, wrong tool for commercial work in engineering materials.
Verdicts are rule-driven from the spec sheet and current price (€354). They don't capture firmware polish, support quality, or reliability - so treat them as a sanity check, not a final answer.
Live offers
Every live listing on the English-language Amazon marketplaces that I've matched to this printer. Cheapest first. Affiliate links.
- 🇮🇹 Drukarka 3D AnkerMake M5CAmazon.it · Used€354.12View
- 🇮🇹 Drukarka 3D AnkerMake M5CAmazon.it · New€365.00View
- 🇫🇷 Imprimante 3D AnkerMake M5, 3D FDM, Intelligente et 5X Plus Rapide, Temps gagné 70%, détails de 0,1 mm, Surveillance par IA intégrée, Auto-Mise à Niveau, Alliage d’alu moulé sous Pression intégréAmazon.fr · New€676.57View
- 🇮🇹 AnkerMake M5 Stampante 3D FDM, 5 Volte Più Veloce ed Extra Intelligente, Riduzione dei Tempi di Stampa del 70%, Dettagli Uniformi di 0,1 mm, Monitoraggio della Telecamera AI IntegratoAmazon.it · New€721.86View
- 🇪🇸 Impresora 3D AnkerMake M5, Impresora 3D FDM, 5 Veces más rápida y ultrainteligente, Reduce el Tiempo de impresión en un 70%, Detalles precisos de 0,1 mm, Control de cámara incorporada con IAAmazon.es · New€790.76View
- 🇬🇧 AnkerMake M5 3D Printer, High-Speed, Speed Upgraded to 500 mm/s, Fast Mode, Smooth Detail, Easy to Use for Beginners, Error Detection with AI Camera, Auto-Leveling, Integrated Die-Cast Aluminum AlloyAmazon.co.uk · New£923.29View
Close alternatives - what €354 gets you elsewhere
Think of this like the shopping-cart upsell: here's what a tenner more or less could buy you in roughly the same category. Same FDM tech, same marketplace, all prices live. Stretches are data-driven; they're not sponsored placements.
Save the money, similar specs on paper. You'd give up: 12.1 L vs 10.6 L build volume, 300°C hot end vs undefined°C.
Get: 23.9 L more build volume (36.0 L).
Get: 4.7 L more build volume (16.8 L) · 350°C hot end (was 300°C).
Frequently asked
What materials can the AnkerMake Drukarka 3D AnkerMake M5C print? +
At €354 the AnkerMake Drukarka 3D AnkerMake M5C has the hot end for engineering materials (300°C) but no active chamber, so ABS and nylon will warp on anything larger than a phone case. Treat it as a PLA/PETG/TPU workhorse with headroom for the occasional small ABS part.
How fast is the AnkerMake Drukarka 3D AnkerMake M5C? +
Advertised at 500 mm/s, but that is motion-system capability, not what the hot end can sustain. Expect real-world prints at 80-150 mm/s without quality collapse.
How big can I print on the AnkerMake Drukarka 3D AnkerMake M5C? +
220×220×250 mm (12.1 L). Comfortable for medium props, functional parts up to ~25 cm, and batch printing. One of the most-used working sizes in hobby 3D printing.
Does the AnkerMake Drukarka 3D AnkerMake M5C have auto-levelling? +
Yes - Automatic auto-levelling probe. Not quite as clean as load-cell or LiDAR, but reliable once calibrated and a world better than manual paper-under-the-nozzle.
Is the AnkerMake Drukarka 3D AnkerMake M5C worth €354? +
€354 is the sweet spot tier. The AnkerMake Drukarka 3D AnkerMake M5C competes directly with the current Bambu A1, Creality K1 and Prusa Mini generation. Hardware-per-pound is tight here - the differentiator is usually software polish and ecosystem.
