Kobra 3 MAX

$459.99 cheapest of 8 live offers

Updated 6 September 2026 · Live prices on every page load from Amazon US + UK

Buy on Amazon.com - $459.99 →

Affiliate link. Price live from the marketplace, not cached.

At a glance

Technology FDM

Build volume 420×420×500 mm (88.2 L)

Kinematics Bedslinger

Max print speed 600 mm/s

Max hot-end temp 300 °C

Max bed temp 90 °C

Nozzle diameter 0.4 mm

Extruders 1

Enclosure Open

Auto-levelling LeviQ 3.0

Features Wi-Fi, Touchscreen, Filament runout sensor

What it gets right

✓ 300°C hot end - handles carbon-fibre nylons and PC, not just the easy stuff.
✓ 88.2 L build volume - room for helmets, large functional parts, bulk runs.

Where it falls short

! Bedslinger design - expect ringing artefacts on tall prints at speed.
! Open frame - PLA and PETG only, realistically. Forget ABS or nylon done properly.

Compare this with another printer

Head-to-head spec + price table against the Anycubic Kobra 3 MAX. Verified printers on this marketplace only.

Who this is for

Buying your first printer

Sensible first-printer territory: priced where you can afford to get it wrong, with auto-levelling so the first layer isn't a ritual. You'll outgrow it in 18 months, which is fine.

Upgrading from an Ender or old Prusa

Bedslinger with middling flow rate - you already have one of these. The whole point of upgrading is speed, rigidity, or print quality that your current machine can't hit. This doesn't clear that bar.

Workshop or small business

No active heated chamber or a hot end that tops out below 280°C means no reliable ABS, ASA, nylon or PC. Fine for a hobbyist, wrong tool for commercial work in engineering materials.

Verdicts are rule-driven from the spec sheet and current price ($460). They don't capture firmware polish, support quality, or reliability - so treat them as a sanity check, not a final answer.

Live offers

Every live listing on the English-language Amazon marketplaces that I've matched to this printer. Cheapest first. Affiliate links.

🇺🇸

Anycubic 3D Printer Kobra 3 MAX Only, Large Printing Volume

Amazon.com · New

$459.99
View
🇺🇸

Bundle Anycubic Kobra 3 Max Combo 3D Printer, Support Multi Color Printing 600mm/s High-Speed Printing, Large Build Volume 420x420x500mm, Auto Leveling & Smart Vibration Compensation PEI Plate

Amazon.com · New

$552.82
View
🇺🇸

(Bundle Anycubic Kobra 3 Max Combo 3D Printer) Large 3D Printer, Support Multi Color Printing 600mm/s High-Speed Printing 420x420x500mm

Amazon.com · New

$552.98
View
🇺🇸

(Bundle Anycubic Kobra 3 Max Combo) Anycub 3D Printer, Support Multi Color Printing 600mm/s High-Speed Printing, Large Build Volume 420x420x500mm

Amazon.com · New

$552.98
View
🇺🇸

（Anycubic Filament Bundle 4KG ） Anycubic Kobra 3 Max Combo 3D Printer + ANYCUBIC PLA 3D Printer Filament 2 Pack of Black & 2 Pack of White

Amazon.com · New

$586.47
View
🇺🇸

（Anycubic Filament Bundle 4KG ） Anycubic Kobra 3 Max Combo 3D Printer, Support Multi Color Printing 600mm/s High-Speed + ANYCUBIC PLA 3D Printer Filament 2 Pack of Gray & 2 Pack of White

Amazon.com · New

$586.47
View
🇺🇸

（Anycubic Filament Bundle 4KG ） Anycubic Kobra 3 Max Combo 3D Printer, Support Multi Color Printing 600mm/s High-Speedr + ANYCUBIC PLA 3D Printer Filament 2 Pack of Black & 2 Pack of White

Amazon.com · New

$586.47
View
🇺🇸

（Bundle 8 Colors） Anycubic Kobra 3 Max Combo 3D Printer, 8 Stunning Multicolor with 2 Anycubic ACE PRO, Large Build Volume 420x420x500mm 600mm/s High-Speed Precise

Amazon.com · New

$752.37
View

Close alternatives - what $460 gets you elsewhere

Think of this like the shopping-cart upsell: here's what a tenner more or less could buy you in roughly the same category. Same FDM tech, same marketplace, all prices live. Stretches are data-driven; they're not sponsored placements.

Spend less

Creality

$419 (-$41)

Save the money, similar specs on paper. You'd give up: 88.2 L vs 17.6 L build volume.

Get: CoreXY motion - faster, more rigid.

Get: CoreXY motion - faster, more rigid.

Open page →

Frequently asked

What materials can the Anycubic Kobra 3 MAX print? +

At $460 the Anycubic Kobra 3 MAX has the hot end for engineering materials (300°C) but no active chamber, so ABS and nylon will warp on anything larger than a phone case. Treat it as a PLA/PETG/TPU workhorse with headroom for the occasional small ABS part.

How fast is the Anycubic Kobra 3 MAX? +

Advertised at 600 mm/s, but that is motion-system capability, not what the hot end can sustain. Expect real-world prints at 80-150 mm/s without quality collapse.

How big can I print on the Anycubic Kobra 3 MAX? +

420×420×500 mm (88.2 L). Big enough for helmets in one piece, full-scale cosplay props, or multiple medium parts in one run. Reliability starts mattering at this scale - a failed 20-hour print stings.

Does the Anycubic Kobra 3 MAX have auto-levelling? +

Yes - LeviQ 3.0 auto-levelling probe. Not quite as clean as load-cell or LiDAR, but reliable once calibrated and a world better than manual paper-under-the-nozzle.

Is the Anycubic Kobra 3 MAX worth $460? +

$460 is the sweet spot tier. The Anycubic Kobra 3 MAX competes directly with the current Bambu A1, Creality K1 and Prusa Mini generation. Hardware-per-pound is tight here - the differentiator is usually software polish and ecosystem.

Long readHow to pick your first 3D printerSpec by spec, what actually matters on a first printer and what the marketing hopes you will not question.Read →Long readFDM vs resin 3D printingWhen each process wins, where each fails, and why most beginners should start with FDM.Read →

Prices are live from the marketplace and refresh on every page load. I earn a small commission on purchases made through the affiliate links above - it costs you nothing and keeps the data-gathering running. I never accept free hardware.

At a glance

What this printer gets right and wrong

Live offers

Close alternatives - what $460 gets you elsewhere

Frequently asked

Related reading