Lab Bamboo 3D-Drucker P2S 220V
Updated 18 October 2026 · Live prices updated daily
Buy on Amazon.de - €697.23 →Affiliate link. Price live from the marketplace, not cached.
At a glance
What this printer gets right and wrong
- ✓ CoreXY motion system - faster and more rigid than a bedslinger, especially on tall prints.
- ✓ 300°C hot end - handles carbon-fibre nylons and PC, not just the easy stuff.
- ✓ 40 mm³/s volumetric flow - genuinely fast, not just advertising-fast.
- ! Nothing stands out as a clear weakness on the spec sheet - but spec sheets never capture firmware polish, customer support or long-term reliability. Read owner reports before committing.
Head-to-head spec + price table against the 3D MARKET Lab Bamboo 3D-Drucker P2S 220V. Verified printers on this marketplace only.
At this price you're well past the sweet spot for a first printer. There's no shame in starting with something cheaper - you'll learn more on a 200-400 machine and have money left for filament.
This is the kind of move that makes you wonder why you put up with your old machine for so long. Faster, more rigid, and the first layer stops being a gamble.
No active heated chamber or a hot end that tops out below 280°C means no reliable ABS, ASA, nylon or PC. Fine for a hobbyist, wrong tool for commercial work in engineering materials.
Verdicts are rule-driven from the spec sheet and current price (€697). They don't capture firmware polish, support quality, or reliability - so treat them as a sanity check, not a final answer.
Live offers
Every live listing on the English-language Amazon marketplaces that I've matched to this printer. Cheapest first. Affiliate links.
Close alternatives - what $697 gets you elsewhere
Think of this like the shopping-cart upsell: here's what a tenner more or less could buy you in roughly the same category. Same FDM tech, same marketplace, all prices live. Stretches are data-driven; they're not sponsored placements.
Save the money, same build volume at 26.2 L. You'd give up: nothing obvious on the spec sheet.
Get: 2.9 L more build volume (19.7 L).
Get: 13.9 L more build volume (30.7 L) · 370°C hot end (was 300°C).
Frequently asked
What materials can the 3D MARKET Lab Bamboo 3D-Drucker P2S 220V print? +
At €697 the 3D MARKET Lab Bamboo 3D-Drucker P2S 220V has the hot end for engineering materials (300°C) but no active chamber, so ABS and nylon will warp on anything larger than a phone case. Treat it as a PLA/PETG/TPU workhorse with headroom for the occasional small ABS part.
How fast is the 3D MARKET Lab Bamboo 3D-Drucker P2S 220V? +
Genuinely fast. Volumetric flow is 40 mm³/s, which means the hot end can melt plastic fast enough to keep up with the motion system. This is the tier where "500 mm/s" marketing claims translate into actual finished parts in half the time of a bedslinger.
How big can I print on the 3D MARKET Lab Bamboo 3D-Drucker P2S 220V? +
256×256×256 mm (16.8 L). Comfortable for medium props, functional parts up to ~25 cm, and batch printing. One of the most-used working sizes in hobby 3D printing.
Does the 3D MARKET Lab Bamboo 3D-Drucker P2S 220V have auto-levelling? +
Yes - Eddy current auto-levelling probe. Not quite as clean as load-cell or LiDAR, but reliable once calibrated and a world better than manual paper-under-the-nozzle.
Is the 3D MARKET Lab Bamboo 3D-Drucker P2S 220V worth €697? +
€697 is serious hobbyist territory. For the 3D MARKET Lab Bamboo 3D-Drucker P2S 220V to justify this over a $500 machine it needs to deliver genuine speed (volumetric flow), reliability at speed, or access to engineering materials. Check the spec table above against those three.
