Ender 3 V3 Plus Impresora 3D CoreXZ 600mm/s Alta
Updated 6 September 2026 · Live prices on every page load from Amazon US + UK
Buy on Amazon.es - €399.00 →Affiliate link. Price live from the marketplace, not cached.
At a glance
What this printer gets right and wrong
Nothing jumps out on the spec sheet as a standout feature at this price.
- ! Bedslinger design - expect ringing artefacts on tall prints at speed.
- ! Open frame - PLA and PETG only, realistically. Forget ABS or nylon done properly.
- ! Manual levelling - plan a weekend of paper-under-the-nozzle rituals before your first clean first layer.
Head-to-head spec + price table against the Creality Ender 3 V3 Plus Impresora 3D CoreXZ 600mm/s Alta. Verified printers on this marketplace only.
No auto-levelling means you'll spend your first weekend adjusting screws and fighting first-layer issues. Fine if you want to learn the hard way - frustrating if you just want prints.
Bedslinger with middling flow rate - you already have one of these. The whole point of upgrading is speed, rigidity, or print quality that your current machine can't hit. This doesn't clear that bar.
No active heated chamber or a hot end that tops out below 280°C means no reliable ABS, ASA, nylon or PC. Fine for a hobbyist, wrong tool for commercial work in engineering materials.
Verdicts are rule-driven from the spec sheet and current price (€399). They don't capture firmware polish, support quality, or reliability - so treat them as a sanity check, not a final answer.
Live offers
Every live listing on the English-language Amazon marketplaces that I've matched to this printer. Cheapest first. Affiliate links.
- 🇪🇸 Creality Ender 3 V3 Plus Impresora 3D CoreXZ 600mm/s Alta Velocidad 300x300x330mm Nivelación Automática Extrusora de Accionamiento Directo Boquilla Trimetálica de Construcción Metálica EstableAmazon.es · Used€399.00View
Close alternatives - what €399 gets you elsewhere
Think of this like the shopping-cart upsell: here's what a tenner more or less could buy you in roughly the same category. Same FDM tech, same marketplace, all prices live. Stretches are data-driven; they're not sponsored placements.
Save the money, similar specs on paper. You'd give up: 12.1 L vs 10.6 L build volume.
Get: 5.5 L more build volume (17.6 L) · 300°C hot end (was 260°C).
Modest upgrade on the spec sheet.
Frequently asked
What materials can the Creality Ender 3 V3 Plus Impresora 3D CoreXZ 600mm/s Alta print? +
At €399 the Creality Ender 3 V3 Plus Impresora 3D CoreXZ 600mm/s Alta is a PLA, PETG, TPU machine. The 260°C hot end covers PETG with a small safety margin. ABS and nylon need an enclosure plus more heat - not this printer.
How fast is the Creality Ender 3 V3 Plus Impresora 3D CoreXZ 600mm/s Alta? +
Advertised at 180 mm/s, but that is motion-system capability, not what the hot end can sustain. Expect real-world prints at 80-150 mm/s without quality collapse.
How big can I print on the Creality Ender 3 V3 Plus Impresora 3D CoreXZ 600mm/s Alta? +
220×220×250 mm (12.1 L). Comfortable for medium props, functional parts up to ~25 cm, and batch printing. One of the most-used working sizes in hobby 3D printing.
Does the Creality Ender 3 V3 Plus Impresora 3D CoreXZ 600mm/s Alta have auto-levelling? +
No - manual levelling only. Plan a weekend tuning the bed with a piece of paper and a hex key before your first clean first layer. At this price in 2026, that is a real drawback.
Is the Creality Ender 3 V3 Plus Impresora 3D CoreXZ 600mm/s Alta worth €399? +
€399 is the sweet spot tier. The Creality Ender 3 V3 Plus Impresora 3D CoreXZ 600mm/s Alta competes directly with the current Bambu A1, Creality K1 and Prusa Mini generation. Hardware-per-pound is tight here - the differentiator is usually software polish and ecosystem.
