SPARKX i7

$355.73 cheapest of 10 live offers

Updated 26 September 2026 · Live prices updated daily

Buy on Amazon.com - $355.73 →

Affiliate link. Price live from the marketplace, not cached.

At a glance

Technology FDM

Build volume 260×260×255 mm (17.6 L)

Min layer height 50 µm

Kinematics Cartesian

Max print speed 500 mm/s

Max hot-end temp 300 °C

Max bed temp 100 °C

Nozzle diameter 0.4 mm

Extruders 1

Enclosure Open

Auto-levelling Full-auto leveling

Frame Aluminium alloy

Features Wi-Fi, Touchscreen, Camera, Filament runout sensor

What it gets right

✓ 300°C hot end - handles carbon-fibre nylons and PC, not just the easy stuff.

Where it falls short

! Open frame - PLA and PETG only, realistically. Forget ABS or nylon done properly.

Compare this with another printer

Head-to-head spec + price table against the Creality SPARKX i7. Verified printers on this marketplace only.

Who this is for

Buying your first printer

Sensible first-printer territory: priced where you can afford to get it wrong, with auto-levelling so the first layer isn't a ritual. You'll outgrow it in 18 months, which is fine.

Upgrading from an Ender or old Prusa

Bedslinger with middling flow rate - you already have one of these. The whole point of upgrading is speed, rigidity, or print quality that your current machine can't hit. This doesn't clear that bar.

Workshop or small business

No active heated chamber or a hot end that tops out below 280°C means no reliable ABS, ASA, nylon or PC. Fine for a hobbyist, wrong tool for commercial work in engineering materials.

Verdicts are rule-driven from the spec sheet and current price ($356). They don't capture firmware polish, support quality, or reliability - so treat them as a sanity check, not a final answer.

Live offers

Every live listing on the English-language Amazon marketplaces that I've matched to this printer. Cheapest first. Affiliate links.

🇺🇸

Creality SPARKX i7 Combo 3D Printer Bundle with 3D Printer Tools Kit 74 Pcs in 1 3D Printing Tool

Amazon.com · New

$355.73
View
🇺🇸

Creality SPARKX i7 Combo 3D Printer, Multi Color with CFS Lite High Speed AI Photo-to-3D Printing 95% Pre-Assemble Auto-Leveling Custom RGB Quick-Swap Essential Parts 10.24×10.24×10 inch

Amazon.com · New

$359.00
View
🇺🇸

Creality SPARKX i7 Combo Multi-Color 3D Printer, Auto Filament Management

Amazon.com · New

$359.00
View
🇺🇸

Creality SPARKX i7 Combo 3D Printer Bundle with Creality RFID PLA White Hyper PLA Filament 1.75mm

Amazon.com · New

$362.39
View
🇺🇸

Creality SPARKX i7 Combo 3D Printer Bundle with Creality RFID PLA Hyper PLA Filament 1.75mm Bundle 2KG (Black&White)

Amazon.com · New

$364.03
View
🇺🇸

Creality SPARKX i7 Combo 3D Printer Bundle with Double-Sided Gold Texture Print Bed Plate

Amazon.com · New

$368.17
View
🇺🇸

Creality SPARKX i7 Combo Multi-Color 3D Printer Bundle with Creality 3D Printer PLA Filament 4KG, Black White Blue Red

Amazon.com · New

$369.18
View
🇺🇸

Creality SPARKX i7 Combo Multi-Color 3D Printer Bundle with Creality Black and White PLA Filament 2KG

Amazon.com · New

$369.98
View
🇺🇸

Creality SPARKX i7 Combo 3D Printer, Bundle with Creality SPARKX i7 3D Printer PrintEase Kit

Amazon.com · New

$402.10
View
🇺🇸

Creality SPARKX i7 Combo Multi-Color 3D Printer Bundle with Creality Hyper 3D Printer PLA Filament 4KG (Black,White,Red,Blue)

Amazon.com · New

$411.42
View

Close alternatives - what $356 gets you elsewhere

Think of this like the shopping-cart upsell: here's what a tenner more or less could buy you in roughly the same category. Same FDM tech, same marketplace, all prices live. Stretches are data-driven; they're not sponsored placements.

Save the money, similar specs on paper. You'd give up: nothing obvious on the spec sheet.

Get: 12.1 L more build volume (29.7 L).

Open page →

Size up

ANYCUBIC

（） Anycubic Kobra 3 Max

$464 (+$109)

Get: 70.6 L more build volume (88.2 L).

Open page →

Frequently asked

What materials can the Creality SPARKX i7 print? +

At $356 the Creality SPARKX i7 has the hot end for engineering materials (300°C) but no active chamber, so ABS and nylon will warp on anything larger than a phone case. Treat it as a PLA/PETG/TPU workhorse with headroom for the occasional small ABS part.

How fast is the Creality SPARKX i7? +

Advertised at 500 mm/s, but that is motion-system capability, not what the hot end can sustain. Expect real-world prints at 80-150 mm/s without quality collapse.

How big can I print on the Creality SPARKX i7? +

260×260×255 mm (17.6 L). Comfortable for medium props, functional parts up to ~25 cm, and batch printing. One of the most-used working sizes in hobby 3D printing.

Does the Creality SPARKX i7 have auto-levelling? +

Yes - Full-auto leveling auto-levelling probe. Not quite as clean as load-cell or LiDAR, but reliable once calibrated and a world better than manual paper-under-the-nozzle.

Is the Creality SPARKX i7 worth $356? +

$356 is the sweet spot tier. The Creality SPARKX i7 competes directly with the current Bambu A1, Creality K1 and Prusa Mini generation. Hardware-per-pound is tight here - the differentiator is usually software polish and ecosystem.

Long readHow to pick your first 3D printerSpec by spec, what actually matters on a first printer and what the marketing hopes you will not question.Read →Long readFDM vs resin 3D printingWhen each process wins, where each fails, and why most beginners should start with FDM.Read →

Prices are live from the marketplace and refresh on every page load. I earn a small commission on purchases made through the affiliate links above - it costs you nothing and keeps the data-gathering running. I never accept free hardware.

At a glance

What this printer gets right and wrong

Live offers

Close alternatives - what $356 gets you elsewhere

Frequently asked

Related reading