LK10 Plus drukarka 3D z klipsem
Updated 5 November 2026 · Live prices updated daily
Buy on Amazon.pl - zł2133.93 →Affiliate link. Price live from the marketplace, not cached.
At a glance
What this printer gets right and wrong
- ✓ 300°C hot end - handles carbon-fibre nylons and PC, not just the easy stuff.
- ✓ 41.0 L build volume - room for helmets, large functional parts, bulk runs.
- ✓ 25 mm³/s volumetric flow - genuinely fast, not just advertising-fast.
- ! Bedslinger design - expect ringing artefacts on tall prints at speed.
- ! Open frame - PLA and PETG only, realistically. Forget ABS or nylon done properly.
- ! Over zł1,500 - you are paying for polish and ecosystem, not raw capability. Cheaper machines match the hardware on paper.
Head-to-head spec + price table against the Longer LK10 Plus drukarka 3D z klipsem. Verified printers on this marketplace only.
At this price you're well past the sweet spot for a first printer. There's no shame in starting with something cheaper - you'll learn more on a 200-400 machine and have money left for filament.
This is the kind of move that makes you wonder why you put up with your old machine for so long. Faster, more rigid, and the first layer stops being a gamble.
No active heated chamber or a hot end that tops out below 280°C means no reliable ABS, ASA, nylon or PC. Fine for a hobbyist, wrong tool for commercial work in engineering materials.
Verdicts are rule-driven from the spec sheet and current price (zł2134). They don't capture firmware polish, support quality, or reliability - so treat them as a sanity check, not a final answer.
Live offers
Every live listing on the English-language Amazon marketplaces that I've matched to this printer. Cheapest first. Affiliate links.
- 🇵🇱 LONGER LK10 Plus drukarka 3D z klipsem, automatyczne poziomowanie i grzanie | Cicha praca silnika, równomierny posuw filamentu, modelarstwo i kreatywne projekty DIYAmazon.pl · Newzł2133.93View
Close alternatives - what $2134 gets you elsewhere
Think of this like the shopping-cart upsell: here's what a tenner more or less could buy you in roughly the same category. Same FDM tech, same marketplace, all prices live. Stretches are data-driven; they're not sponsored placements.
Save the money, similar specs on paper. You'd give up: 41.0 L vs 8.0 L build volume, 300°C hot end vs undefined°C.
Modest upgrade on the spec sheet.
Get: 15.0 L more build volume (56.0 L).
Frequently asked
What materials can the Longer LK10 Plus drukarka 3D z klipsem print? +
At zł2134 the Longer LK10 Plus drukarka 3D z klipsem has the hot end for engineering materials (300°C) but no active chamber, so ABS and nylon will warp on anything larger than a phone case. Treat it as a PLA/PETG/TPU workhorse with headroom for the occasional small ABS part.
How fast is the Longer LK10 Plus drukarka 3D z klipsem? +
Genuinely fast. Volumetric flow is 25 mm³/s, which means the hot end can melt plastic fast enough to keep up with the motion system. This is the tier where "500 mm/s" marketing claims translate into actual finished parts in half the time of a bedslinger.
How big can I print on the Longer LK10 Plus drukarka 3D z klipsem? +
320×320×400 mm (41.0 L). Big enough for helmets in one piece, full-scale cosplay props, or multiple medium parts in one run. Reliability starts mattering at this scale - a failed 20-hour print stings.
Does the Longer LK10 Plus drukarka 3D z klipsem have auto-levelling? +
Yes - Eddy current auto-levelling probe. Not quite as clean as load-cell or LiDAR, but reliable once calibrated and a world better than manual paper-under-the-nozzle.
Is the Longer LK10 Plus drukarka 3D z klipsem worth zł2134? +
zł2134+ is prosumer/workshop money. Diminishing returns on print quality versus a $700-1000 machine; real returns on long-term reliability, support contracts and replacement parts. Worth it if the printer makes you money, overkill if it is a weekend hobby.
