Blu-5 d'imprimante 3D Prusa I3 3D Touch PEI
Updated 26 September 2026 · Live prices updated daily
Buy on Amazon.fr - €740.10 →Affiliate link. Price live from the marketplace, not cached.
At a glance
What this printer gets right and wrong
- ✓ 36.0 L build volume - room for helmets, large functional parts, bulk runs.
- ! Open frame - PLA and PETG only, realistically. Forget ABS or nylon done properly.
Head-to-head spec + price table against the MINGD Blu-5 d'imprimante 3D Prusa I3 3D Touch PEI. Verified printers on this marketplace only.
At this price you're well past the sweet spot for a first printer. There's no shame in starting with something cheaper - you'll learn more on a 200-400 machine and have money left for filament.
Bedslinger with middling flow rate - you already have one of these. The whole point of upgrading is speed, rigidity, or print quality that your current machine can't hit. This doesn't clear that bar.
No active heated chamber or a hot end that tops out below 280°C means no reliable ABS, ASA, nylon or PC. Fine for a hobbyist, wrong tool for commercial work in engineering materials.
Verdicts are rule-driven from the spec sheet and current price (€740). They don't capture firmware polish, support quality, or reliability - so treat them as a sanity check, not a final answer.
Live offers
Every live listing on the English-language Amazon marketplaces that I've matched to this printer. Cheapest first. Affiliate links.
- 🇫🇷 MINGD Blu-5 Kit d'imprimante 3D Prusa I3 3D Touch PEI feuille magnétique double entraînement extrudeuse Hotbed double axe Z imprimante 3D Bluer Plus (Color : Blu-5, Size : EU)Amazon.fr · New€740.10View
Close alternatives - what $740 gets you elsewhere
Think of this like the shopping-cart upsell: here's what a tenner more or less could buy you in roughly the same category. Same FDM tech, same marketplace, all prices live. Stretches are data-driven; they're not sponsored placements.
Save the money, similar specs on paper. You'd give up: 36.0 L vs 16.8 L build volume.
Get: 300°C hot end (was 260°C).
Get: 6.9 L more build volume (42.9 L) · 350°C hot end (was 260°C).
Frequently asked
What materials can the MINGD Blu-5 d'imprimante 3D Prusa I3 3D Touch PEI print? +
At €740 the MINGD Blu-5 d'imprimante 3D Prusa I3 3D Touch PEI is a PLA, PETG, TPU machine. The 260°C hot end covers PETG with a small safety margin. ABS and nylon need an enclosure plus more heat - not this printer.
How fast is the MINGD Blu-5 d'imprimante 3D Prusa I3 3D Touch PEI? +
Advertised at 200 mm/s, but that is motion-system capability, not what the hot end can sustain. Expect real-world prints at 80-150 mm/s without quality collapse.
How big can I print on the MINGD Blu-5 d'imprimante 3D Prusa I3 3D Touch PEI? +
300×300×400 mm (36.0 L). Big enough for helmets in one piece, full-scale cosplay props, or multiple medium parts in one run. Reliability starts mattering at this scale - a failed 20-hour print stings.
Does the MINGD Blu-5 d'imprimante 3D Prusa I3 3D Touch PEI have auto-levelling? +
Yes - 3D Touch auto-levelling probe. Not quite as clean as load-cell or LiDAR, but reliable once calibrated and a world better than manual paper-under-the-nozzle.
Is the MINGD Blu-5 d'imprimante 3D Prusa I3 3D Touch PEI worth €740? +
€740 is serious hobbyist territory. For the MINGD Blu-5 d'imprimante 3D Prusa I3 3D Touch PEI to justify this over a $500 machine it needs to deliver genuine speed (volumetric flow), reliability at speed, or access to engineering materials. Check the spec table above against those three.
