Quietest 3D printers - flat and studio friendly

Updated 5 November 2026 · Live prices updated daily

Fully enclosed printers with stepper dampers and low-RPM fans. If the printer lives in a home office, bedroom or studio, these keep the overnight print from waking anyone up.

#1

ANYCUBIC

Kobra S1 Max Imprimante 3D

€849 CoreXY · heated chamber · 42.9 L · 350°C · LeviQ 3.0
#2

QIDI TECH

QIDI Plus5 Imprimante 3D

€712 CoreXY · heated chamber · 30.7 L · 370°C · Loadcell
#3

Voxelab

Flashforge Creator 5 Pro Imprimante 3D ind

€799 CoreXY · heated chamber · 16.8 L · 320°C · Fully Automatic Calibration &
#4

ELEGOO

Centauri Carbon 2 Imprimante 3D Volume 256

€417 CoreXY · 16.8 L · 350°C · Full-Auto Calibration
#5

BAMBULAB

Bambu Lab Imprimante 3D – P1S

€543 CoreXY · 16.8 L · 300°C · Strain gauge
#6

Bambu Lab

P1S Imprimante 3D avec AMS pour Impression

€559 CoreXY · 16.8 L · 300°C · Strain gauge
#7

XYZprinting

XYZ Da Vinci Imprimante 3D avec Scanner in

€579 Cartesian · 7.6 L · 240°C
#8

AOSEED

Imprimante 3D Alimentée PLA pour Enfants

€241 · 1.7 L · 260°C
#9

R QIDI TECHNOLOGY

QIDI PLUS4 Imprimante 3D

€2857 CoreXY · 26.2 L · 370°C · Automatic
#10

FLASHFORGE

Imprimantes 3D Flashforge Adventurer 5M Pr

€399 CoXY · 10.6 L · One-click automatic leveling

Matt's take

Quiet matters more than most first-time buyers realise. A bedslinger with open TMC2209s running PLA at 180 mm/s is 55-60 dB at a metre - audible through a bedroom wall. The tricks that drop it to a comfortable 45 dB are an enclosure (damps all three kinematic noise sources at once), stealth-chop stepper drivers, and slow-spinning part-cooling fans. Prusa MK4S, Bambu P1S and most Qidi enclosed machines land at this level on stock firmware. Expect extra cost: you are paying for the acoustic insulation as much as the chamber heat.

Frequently asked

How loud is a typical 3D printer? +

Cheap open-frame printers hit 55-60 dB at 1 m during rapid moves - that is as loud as normal conversation and definitely audible through an internal door. Enclosed printers with dampers drop to 40-45 dB, closer to a quiet fridge.

Does an enclosure actually make the printer quieter? +

Yes, and it is the single biggest lever. Enclosures block airborne noise from the motors, fans and stepper vibration all at once - a fully enclosed printer is typically 10-15 dB quieter than the same hardware open, which sounds roughly half as loud.

Can I put a cheap printer in a cabinet to quiet it down? +

You can, but you need to keep the electronics cool (vent the bottom), avoid trapping ABS fumes, and not let the chamber hit 60 °C+ which damages the PLA parts on hobby machines. DIY works; a factory-enclosed machine is less fuss.

Other shortlists

for ABS, ASA and nylon large-format 3D printers CoreXY 3D printers for beginners multi-colour and multi-material 3D printers for tabletop miniatures for schools and classrooms with remote monitoring Fastest 3D printers (by real volumetric flow) with high-temp heated beds compact 3D printers (small desks, small spaces) for cosplay and props

Long readIs an enclosed 3D printer worth it?When the enclosure premium actually pays back - and when it is money wasted on PLA.Read →Long readHow to pick your first 3D printerSpec by spec, what actually matters on a first printer and what the marketing hopes you will not question.Read →

Ranking is spec-driven. It favours printers that objectively have the capabilities this shortlist targets. Firmware, support quality and long-term reliability aren't on the spec sheet - read the full printer page and owner reports before committing.

Quietest 3D printers - flat and studio friendly

Matt's take

Frequently asked

Related reading