ET4 Pro
Updated 15 October 2026 · Live prices updated daily
Buy on Amazon.co.uk - £329.00 →Affiliate link. Price live from the marketplace, not cached.
At a glance
What this printer gets right and wrong
Nothing jumps out on the spec sheet as a standout feature at this price.
- ! Bedslinger design - expect ringing artefacts on tall prints at speed.
- ! Open frame - PLA and PETG only, realistically. Forget ABS or nylon done properly.
- ! Max hot-end temp only 250°C - PLA-dominant territory, no PETG with any safety margin.
Head-to-head spec + price table against the Anet ET4 Pro. Verified printers on this marketplace only.
Sensible first-printer territory: priced where you can afford to get it wrong, with auto-levelling so the first layer isn't a ritual. You'll outgrow it in 18 months, which is fine.
Bedslinger with middling flow rate - you already have one of these. The whole point of upgrading is speed, rigidity, or print quality that your current machine can't hit. This doesn't clear that bar.
No active heated chamber or a hot end that tops out below 280°C means no reliable ABS, ASA, nylon or PC. Fine for a hobbyist, wrong tool for commercial work in engineering materials.
Verdicts are rule-driven from the spec sheet and current price (£329). They don't capture firmware polish, support quality, or reliability - so treat them as a sanity check, not a final answer.
Live offers
Every live listing on the English-language Amazon marketplaces that I've matched to this printer. Cheapest first. Affiliate links.
- 🇬🇧 Anet ET4 Pro 3D Printer, Upgrade High Precision with 2.8 Inch Full Color Touchscreen Heatbed 8GB TF Card PLA Sample Filament Support Resume Printing Filament Detection Auto Leveling 220 * 220 * 250mmAmazon.co.uk · New£329.00View
Close alternatives - what $329 gets you elsewhere
Think of this like the shopping-cart upsell: here's what a tenner more or less could buy you in roughly the same category. Same FDM tech, same marketplace, all prices live. Stretches are data-driven; they're not sponsored placements.
Save the money, same build volume at 12.1 L. You'd give up: nothing obvious on the spec sheet.
Get: 6.8 L more build volume (18.9 L) · 370°C hot end (was 250°C).
Get: 5.5 L more build volume (17.6 L) · 300°C hot end (was 250°C).
Frequently asked
What materials can the Anet ET4 Pro print? +
At £329 the Anet ET4 Pro realistically prints PLA and TPU. The 250°C hot end is too tight for PETG with confidence and rules out ABS/nylon entirely.
How fast is the Anet ET4 Pro? +
Advertised at 150 mm/s, but that is motion-system capability, not what the hot end can sustain. Expect real-world prints at 80-150 mm/s without quality collapse.
How big can I print on the Anet ET4 Pro? +
220×220×250 mm (12.1 L). Comfortable for medium props, functional parts up to ~25 cm, and batch printing. One of the most-used working sizes in hobby 3D printing.
Does the Anet ET4 Pro have auto-levelling? +
Yes - Yes auto-levelling probe. Not quite as clean as load-cell or LiDAR, but reliable once calibrated and a world better than manual paper-under-the-nozzle.
Is the Anet ET4 Pro worth £329? +
£329 is the sweet spot tier. The Anet ET4 Pro competes directly with the current Bambu A1, Creality K1 and Prusa Mini generation. Hardware-per-pound is tight here - the differentiator is usually software polish and ecosystem.
