Hi Multi Color
Updated 26 September 2026 · Live prices updated daily
Buy on Amazon.com - $370.88 →Affiliate link. Price live from the marketplace, not cached.
At a glance
What this printer gets right and wrong
- ✓ 300°C hot end - handles carbon-fibre nylons and PC, not just the easy stuff.
- ✓ 20.3 L build volume - room for helmets, large functional parts, bulk runs.
- ! Bedslinger design - expect ringing artefacts on tall prints at speed.
- ! Open frame - PLA and PETG only, realistically. Forget ABS or nylon done properly.
Head-to-head spec + price table against the Creality Hi Multi Color. Verified printers on this marketplace only.
Sensible first-printer territory: priced where you can afford to get it wrong, with auto-levelling so the first layer isn't a ritual. You'll outgrow it in 18 months, which is fine.
Bedslinger with middling flow rate - you already have one of these. The whole point of upgrading is speed, rigidity, or print quality that your current machine can't hit. This doesn't clear that bar.
No active heated chamber or a hot end that tops out below 280°C means no reliable ABS, ASA, nylon or PC. Fine for a hobbyist, wrong tool for commercial work in engineering materials.
Verdicts are rule-driven from the spec sheet and current price ($371). They don't capture firmware polish, support quality, or reliability - so treat them as a sanity check, not a final answer.
Live offers
Every live listing on the English-language Amazon marketplaces that I've matched to this printer. Cheapest first. Affiliate links.
- 🇺🇸 Creality Hi Combo Multi Color 3D Printer and Filament Dryer Plus Storage BoxAmazon.com · New$370.88View
- 🇪🇸 Creality Hi (A) Impresora 3D Multicolor Nuevo, 500mm/s Alta Velocidad Impresión y Consumibles de Identificación Automática RFID, Nivelación Automática, Más Grande 260x260x300mmAmazon.es · New€375.00View
- 🇺🇸 Creality Hi Combo (A) 3D Printer Bundle with Hyper RFID 3D Printer Filament (2White+2Black)Amazon.com · New$383.14View
- 🇫🇷 FTVOGUE Imprimante 3D avec Système CFS Multicolore, 16 Couleurs, Nivellement Automatique, Vitesse de 500 Mm/s, Extrudeuse à Entraînement Direct pour Grande de 260 X 260 X 300 Mm (Prise UE)Amazon.fr · New€1050.73View
- 🇮🇹 FTVOGUE Stampante 3D con CFS Multicolore 16 Colori Auto Livellamento Velocità 500 Mm/s Estrusore a Trasmissione Diretta per Stampe di Grandi Dimensioni 260x260x300 Mm (Spina europea)Amazon.it · New€1064.89View
Close alternatives - what $371 gets you elsewhere
Think of this like the shopping-cart upsell: here's what a tenner more or less could buy you in roughly the same category. Same FDM tech, same marketplace, all prices live. Stretches are data-driven; they're not sponsored placements.
Save the money, similar specs on paper. You'd give up: 20.3 L vs 10.6 L build volume.
Get: 350°C hot end (was 300°C) · CoreXY motion - faster, more rigid.
Get: 67.9 L more build volume (88.2 L).
Frequently asked
What materials can the Creality Hi Multi Color print? +
At $371 the Creality Hi Multi Color has the hot end for engineering materials (300°C) but no active chamber, so ABS and nylon will warp on anything larger than a phone case. Treat it as a PLA/PETG/TPU workhorse with headroom for the occasional small ABS part.
How fast is the Creality Hi Multi Color? +
Advertised at 500 mm/s, but that is motion-system capability, not what the hot end can sustain. Expect real-world prints at 80-150 mm/s without quality collapse.
How big can I print on the Creality Hi Multi Color? +
260×260×300 mm (20.3 L). Big enough for helmets in one piece, full-scale cosplay props, or multiple medium parts in one run. Reliability starts mattering at this scale - a failed 20-hour print stings.
Does the Creality Hi Multi Color have auto-levelling? +
Yes - Auto Leveling auto-levelling probe. Not quite as clean as load-cell or LiDAR, but reliable once calibrated and a world better than manual paper-under-the-nozzle.
Is the Creality Hi Multi Color worth $371? +
$371 is the sweet spot tier. The Creality Hi Multi Color competes directly with the current Bambu A1, Creality K1 and Prusa Mini generation. Hardware-per-pound is tight here - the differentiator is usually software polish and ecosystem.
