Drukarka 3D K2 SE
Updated 26 September 2026 · Live prices updated daily
Buy on Amazon.pl - zł1208.31 →Affiliate link. Price live from the marketplace, not cached.
At a glance
What this printer gets right and wrong
- ✓ CoreXY motion system - faster and more rigid than a bedslinger, especially on tall prints.
- ✓ 300°C hot end - handles carbon-fibre nylons and PC, not just the easy stuff.
- ! Open frame - PLA and PETG only, realistically. Forget ABS or nylon done properly.
Head-to-head spec + price table against the Creality Drukarka 3D K2 SE. Verified printers on this marketplace only.
At this price you're well past the sweet spot for a first printer. There's no shame in starting with something cheaper - you'll learn more on a 200-400 machine and have money left for filament.
This is the kind of move that makes you wonder why you put up with your old machine for so long. Faster, more rigid, and the first layer stops being a gamble.
No active heated chamber or a hot end that tops out below 280°C means no reliable ABS, ASA, nylon or PC. Fine for a hobbyist, wrong tool for commercial work in engineering materials.
Verdicts are rule-driven from the spec sheet and current price (zł1208). They don't capture firmware polish, support quality, or reliability - so treat them as a sanity check, not a final answer.
Live offers
Every live listing on the English-language Amazon marketplaces that I've matched to this printer. Cheapest first. Affiliate links.
- 🇵🇱 Creality Drukarka 3D K2 SE, obsługuje drukowanie wielokolorowe (wymagany CFS), 500 mm/s, automatyczna regulacja wibracji, kompaktowa drukarka biurkowa (aktualizacjaAmazon.pl · Newzł1208.31View
- 🇵🇱 Creality K2 SE drukarka 3D z 2 rolkami filamentu Hyper PLA RFID (kolor losowy), szybkie drukowanie 500 mm/s, 220 × 215 × 245 mm, przestrzeń montażowa, automatyczne poziomowanie, wytłaczarkaAmazon.pl · Newzł1232.26View
- 🇵🇱 Creality K2 SE Combo drukarka 3D 2026, druk wielokolorowy z CFS, wysoka prędkość do 500 mm/s, inteligentne poziomowanie samochodowe, w pełni metalowa rama, w pełni zmontowana, przestrzeń montażowa 220Amazon.pl · Newzł1993.03View
Close alternatives - what zł1208 gets you elsewhere
Think of this like the shopping-cart upsell: here's what a tenner more or less could buy you in roughly the same category. Same FDM tech, same marketplace, all prices live. Stretches are data-driven; they're not sponsored placements.
Save the money, same build volume at 11.6 L. You'd give up: nothing obvious on the spec sheet.
Get: 6.0 L more build volume (17.6 L).
Modest upgrade on the spec sheet.
Frequently asked
What materials can the Creality Drukarka 3D K2 SE print? +
At zł1208 the Creality Drukarka 3D K2 SE has the hot end for engineering materials (300°C) but no active chamber, so ABS and nylon will warp on anything larger than a phone case. Treat it as a PLA/PETG/TPU workhorse with headroom for the occasional small ABS part.
How fast is the Creality Drukarka 3D K2 SE? +
Advertised at 500 mm/s, but that is motion-system capability, not what the hot end can sustain. Expect real-world prints at 80-150 mm/s without quality collapse.
How big can I print on the Creality Drukarka 3D K2 SE? +
220×215×245 mm (11.6 L). Comfortable for medium props, functional parts up to ~25 cm, and batch printing. One of the most-used working sizes in hobby 3D printing.
Does the Creality Drukarka 3D K2 SE have auto-levelling? +
Yes - Smart leveling auto-levelling probe. Not quite as clean as load-cell or LiDAR, but reliable once calibrated and a world better than manual paper-under-the-nozzle.
Is the Creality Drukarka 3D K2 SE worth zł1208? +
zł1208+ is prosumer/workshop money. Diminishing returns on print quality versus a $700-1000 machine; real returns on long-term reliability, support contracts and replacement parts. Worth it if the printer makes you money, overkill if it is a weekend hobby.
