Photon P1 con Piattaforma Doppio Colore/Materiale
Updated 26 September 2026 · Live prices updated daily
Buy on Amazon.it - €549.99 →Affiliate link. Price live from the marketplace, not cached.
At a glance
What this printer gets right and wrong
Nothing jumps out on the spec sheet as a standout feature at this price.
- ! Open frame - PLA and PETG only, realistically. Forget ABS or nylon done properly.
- ! Resin workflow - IPA baths, UV post-cure, nitrile gloves. Not a set-and-forget process.
Head-to-head spec + price table against the ANYCUBIC Photon P1 con Piattaforma Doppio Colore/Materiale. Verified printers on this marketplace only.
Resin isn't a beginner's hobby. The chemicals, the IPA baths, the post-cure stations - it's a workflow. Start with FDM unless miniatures are specifically your reason for getting in.
A resin printer is a sideways move, not an upgrade - different workflow, different outputs. Worth it if you want minis or detailed parts, pointless if you want faster PLA prints.
For dental, jewellery, or high-detail prototyping this is a legitimate production tool. The workflow overhead is real but the output justifies it in those niches.
Verdicts are rule-driven from the spec sheet and current price (€550). They don't capture firmware polish, support quality, or reliability - so treat them as a sanity check, not a final answer.
Live offers
Every live listing on the English-language Amazon marketplaces that I've matched to this printer. Cheapest first. Affiliate links.
- 🇮🇹 Anycubic Photon P1 con Piattaforma Doppio Colore/Materiale Stampante ResinaAmazon.it · New€549.99View
- 🇮🇹 Anycubic Photon P1 Stampante Resina con Piattaforma Doppio Colore/MaterialeAmazon.it · New€549.99View
- 🇮🇹 ANYCUBIC Photon P1 14K Stampante 3D Resina, 10,1" LCD Stampa 3D con Livellamento Automatico 3.0 e Riscaldamento Intelligente, Tecnologia Wave Release, Stampa a Doppio Materiale KitAmazon.it · New€564.14View
- 🇮🇹 Anycubic Photon P1 (con Piattaforma d Stampa a Doppio Colore/Materiale) Stampante 3D in Resina 14K, Serbatoio Della Resina Riscaldato e Vite a Ricircolo di Sfere, ABS-Like Resin 3.0 4kgAmazon.it · New€598.38View
- 🇮🇹 ANYCUBIC Photon P1 14K Stampante 3D Resina con Livellamento Auto 3.0Amazon.it · New€599.99View
- 🇮🇹 Anycubic Photon P1 (con Piattaforma di Stampa a Doppio Colore/Materiale) Stampante 3D a Resina, Risoluzione 14K 13312x5120, Volume di Costruzione 6,5 L, ABS-Like Resin 3.0 4KGAmazon.it · New€604.48View
- 🇮🇹 Anycubic Photon P1 (con Piattaforma d Stampa a Doppio Colore/Materiale) Stampante 3D in Resina 14K, Volume di Stampa 6,5 LAmazon.it · New€609.82View
- 🇮🇹 Anycubic Photon P1 (con Piattaforma di Stampa a Doppio Colore/Materiale) Stampante 3D a Resina, 14K Risoluzione 13312x5120, Riscaldamento Intelligente del Serbatoio, Standard Resina 4KGAmazon.it · New€610.33View
- 🇮🇹 Anycubic Photon P1 (con Piattaforma d Stampa a Doppio Colore/Materiale) 14K Stampante 3D in Resina, Serbatoio Della Resina Riscaldato e Vite a Ricircolo di Sfere, Standard Resina 4kgAmazon.it · New€613.19View
- 🇮🇹 Anycubic Photon P1 (con Piattaforma di Stampa a Doppio Colore/Materiale) Stampante 3D a Resina, Risoluzione 14K 13312x5120, Resina ABS-Like Pro 2 4KGAmazon.it · New€631.79View
- 🇮🇹 ANYCUBIC Photon P1 Max Stampante 3D Resina 18,3L con Auto-LivellamentoAmazon.it · New€999.00View
Close alternatives - what €550 gets you elsewhere
Think of this like the shopping-cart upsell: here's what a tenner more or less could buy you in roughly the same category. Same MSLA tech, same marketplace, all prices live. Stretches are data-driven; they're not sponsored placements.
Save the money, same build volume at 59.0 L. You'd give up: nothing obvious on the spec sheet.
Modest upgrade on the spec sheet.
Modest upgrade on the spec sheet.
Frequently asked
How sharp are prints on the ANYCUBIC Photon P1 con Piattaforma Doppio Colore/Materiale? +
16.8 µm XY resolution. Fine enough for 28 mm tabletop minis, jewellery prototypes, and dental work. You will not see pixel artefacts on typical hobby prints.
What fits on the ANYCUBIC Photon P1 con Piattaforma Doppio Colore/Materiale build plate? +
223×126×230 mm (6.5 L). Large enough for busts, multi-figure army trays and medium props sliced from a single file.
What else do I need to buy besides the ANYCUBIC Photon P1 con Piattaforma Doppio Colore/Materiale? +
At minimum: a wash-and-cure station (€80-130), nitrile gloves, a bottle of IPA for washing, a funnel with filter, and somewhere ventilated to print. The printer is typically two-thirds of the total starting cost on a resin setup.
Is the ANYCUBIC Photon P1 con Piattaforma Doppio Colore/Materiale worth €550? +
€550 is serious hobbyist territory. For the ANYCUBIC Photon P1 con Piattaforma Doppio Colore/Materiale to justify this over a $500 machine it needs to deliver genuine speed (volumetric flow), reliability at speed, or access to engineering materials. Check the spec table above against those three.
