Impresora 3D Sovol SV08 Core-XY con cámara
Updated 26 September 2026 · Live prices updated daily
Buy on Amazon.es - €469.00 →Affiliate link. Price live from the marketplace, not cached.
At a glance
What this printer gets right and wrong
- ✓ CoreXY motion system - faster and more rigid than a bedslinger, especially on tall prints.
- ✓ 300°C hot end - handles carbon-fibre nylons and PC, not just the easy stuff.
- ✓ 42.4 L build volume - room for helmets, large functional parts, bulk runs.
- ! Open frame - PLA and PETG only, realistically. Forget ABS or nylon done properly.
Head-to-head spec + price table against the Sovol Impresora 3D Sovol SV08 Core-XY con cámara. Verified printers on this marketplace only.
Sensible first-printer territory: priced where you can afford to get it wrong, with auto-levelling so the first layer isn't a ritual. You'll outgrow it in 18 months, which is fine.
This is the kind of move that makes you wonder why you put up with your old machine for so long. Faster, more rigid, and the first layer stops being a gamble.
No active heated chamber or a hot end that tops out below 280°C means no reliable ABS, ASA, nylon or PC. Fine for a hobbyist, wrong tool for commercial work in engineering materials.
Verdicts are rule-driven from the spec sheet and current price (€469). They don't capture firmware polish, support quality, or reliability - so treat them as a sanity check, not a final answer.
Live offers
Every live listing on the English-language Amazon marketplaces that I've matched to this printer. Cheapest first. Affiliate links.
- 🇪🇸 Impresora 3D Sovol SV08 Core-XY con cámara, impresión de Alta Velocidad de 700 mm/s con código Abierto Voron 2.4, 4 Motores Z Independientes, Control Remoto, tamaño de impresión 350 x 350 x 345 mmAmazon.es · New€469.00View
- 🇺🇸 Sovol SV08 CoreXY 3D Printer, Voron 2.4 700mm/s High Speed 3D PrintersAmazon.com · Used$516.33View
- 🇮🇹 Sovol SV08 Core XY - Voron 2.4 Open Source Stampante 3D con fotocamera, 700 mm/s stampa ad alta velocità, 4 motori a Z indipendenti, controllo remoto, dimensioni di stampa 350 x 350 x 345 mmAmazon.it · New€549.00View
- 🇺🇸 Sovol SV08 CoreXY 3D Printer, Voron 2.4 700mm/s High Speed 3D PrintersAmazon.com · New$549.00View
- 🇺🇸 Sovol SV08 3D Printer and Sovol SV08 Metal and Tempered Glass Open Enclosure with Drag Chain & Filter FanAmazon.com · New$728.99View
Close alternatives - what $469 gets you elsewhere
Think of this like the shopping-cart upsell: here's what a tenner more or less could buy you in roughly the same category. Same FDM tech, same marketplace, all prices live. Stretches are data-driven; they're not sponsored placements.
Save the money, similar specs on paper. You'd give up: 42.4 L vs 16.8 L build volume.
Get: 370°C hot end (was 300°C).
Modest upgrade on the spec sheet.
Frequently asked
What materials can the Sovol Impresora 3D Sovol SV08 Core-XY con cámara print? +
At €469 the Sovol Impresora 3D Sovol SV08 Core-XY con cámara has the hot end for engineering materials (300°C) but no active chamber, so ABS and nylon will warp on anything larger than a phone case. Treat it as a PLA/PETG/TPU workhorse with headroom for the occasional small ABS part.
How fast is the Sovol Impresora 3D Sovol SV08 Core-XY con cámara? +
Advertised at 700 mm/s, but that is motion-system capability, not what the hot end can sustain. Expect real-world prints at 80-150 mm/s without quality collapse.
How big can I print on the Sovol Impresora 3D Sovol SV08 Core-XY con cámara? +
350×350×345 mm (42.4 L). Big enough for helmets in one piece, full-scale cosplay props, or multiple medium parts in one run. Reliability starts mattering at this scale - a failed 20-hour print stings.
Does the Sovol Impresora 3D Sovol SV08 Core-XY con cámara have auto-levelling? +
Yes - QGL auto-levelling probe. Not quite as clean as load-cell or LiDAR, but reliable once calibrated and a world better than manual paper-under-the-nozzle.
Is the Sovol Impresora 3D Sovol SV08 Core-XY con cámara worth €469? +
€469 is the sweet spot tier. The Sovol Impresora 3D Sovol SV08 Core-XY con cámara competes directly with the current Bambu A1, Creality K1 and Prusa Mini generation. Hardware-per-pound is tight here - the differentiator is usually software polish and ecosystem.
