FDM Mini 3D -skrivare
Updated 26 September 2026 · Live prices updated daily
Buy on Amazon.se - kr1181.08 →Affiliate link. Price live from the marketplace, not cached.
At a glance
What this printer gets right and wrong
Nothing jumps out on the spec sheet as a standout feature at this price.
- ! Bedslinger design - expect ringing artefacts on tall prints at speed.
- ! Max hot-end temp only 230°C - PLA-dominant territory, no PETG with any safety margin.
- ! 1.0 L build volume - fine for calibration prints and small parts, awkward for anything bigger than a mug.
Head-to-head spec + price table against the Annadue FDM Mini 3D -skrivare. Verified printers on this marketplace only.
At this price you're well past the sweet spot for a first printer. There's no shame in starting with something cheaper - you'll learn more on a 200-400 machine and have money left for filament.
Bedslinger with middling flow rate - you already have one of these. The whole point of upgrading is speed, rigidity, or print quality that your current machine can't hit. This doesn't clear that bar.
No active heated chamber or a hot end that tops out below 280°C means no reliable ABS, ASA, nylon or PC. Fine for a hobbyist, wrong tool for commercial work in engineering materials.
Verdicts are rule-driven from the spec sheet and current price (kr1181). They don't capture firmware polish, support quality, or reliability - so treat them as a sanity check, not a final answer.
Live offers
Every live listing on the English-language Amazon marketplaces that I've matched to this printer. Cheapest first. Affiliate links.
- 🇸🇪 FDM Mini 3D -skrivare, Hög Noggrannhetsfrekvensavdelning Multiplexera 3D -skrivarmaskin, Helt Monterad 3D -skrivare för Nybörjare, Utskriftsstorlek 100x100x100mm (WHITE)Amazon.se · Newkr1181.08View
- 🇸🇪 FDM Mini 3D -skrivare, Hög Noggrannhetsfrekvensavdelning Multiplexera 3D -skrivarmaskin, Helt Monterad 3D -skrivare för Nybörjare, Utskriftsstorlek 100x100x100mm (BLACK)Amazon.se · Newkr1191.90View
- 🇸🇪 Annadue FDM Mini 3D -skrivare, Helt Monterade 3D -skrivare för Studenter och Nybörjare, Stöder 1,75 Mm 3D -utskriftsfilament, Utskriftsstorlek 100x100x100mm (Svart)Amazon.se · Newkr1337.17View
Close alternatives - what kr1181 gets you elsewhere
Think of this like the shopping-cart upsell: here's what a tenner more or less could buy you in roughly the same category. Same FDM tech, same marketplace, all prices live. Stretches are data-driven; they're not sponsored placements.
Save the money, same build volume at 1.0 L. You'd give up: 230°C hot end vs undefined°C.
Get: 9.6 L more build volume (10.6 L) · 280°C hot end (was 230°C).
Modest upgrade on the spec sheet.
Frequently asked
What materials can the Annadue FDM Mini 3D -skrivare print? +
At kr1181 the Annadue FDM Mini 3D -skrivare realistically prints PLA and TPU. The 230°C hot end is too tight for PETG with confidence and rules out ABS/nylon entirely.
How fast is the Annadue FDM Mini 3D -skrivare? +
Advertised at 40 mm/s, but that is motion-system capability, not what the hot end can sustain. Expect real-world prints at 80-150 mm/s without quality collapse.
How big can I print on the Annadue FDM Mini 3D -skrivare? +
100×100×100 mm (1.0 L). Small build area. Fine for calibration prints, minis, keychains, small functional parts. Awkward for anything bigger than a coffee mug.
Is the Annadue FDM Mini 3D -skrivare worth kr1181? +
kr1181+ is prosumer/workshop money. Diminishing returns on print quality versus a $700-1000 machine; real returns on long-term reliability, support contracts and replacement parts. Worth it if the printer makes you money, overkill if it is a weekend hobby.
