Rot K1C 3D-Drucker
Updated 16 October 2026 · Live prices updated daily
Buy on Amazon.de - €454.30 →Affiliate link. Price live from the marketplace, not cached.
At a glance
What this printer gets right and wrong
- ✓ CoreXY motion system - faster and more rigid than a bedslinger, especially on tall prints.
- ✓ 300°C hot end - handles carbon-fibre nylons and PC, not just the easy stuff.
- ! Open frame - PLA and PETG only, realistically. Forget ABS or nylon done properly.
Head-to-head spec + price table against the Creality Rot K1C 3D-Drucker. Verified printers on this marketplace only.
Sensible first-printer territory: priced where you can afford to get it wrong, with auto-levelling so the first layer isn't a ritual. You'll outgrow it in 18 months, which is fine.
This is the kind of move that makes you wonder why you put up with your old machine for so long. Faster, more rigid, and the first layer stops being a gamble.
No active heated chamber or a hot end that tops out below 280°C means no reliable ABS, ASA, nylon or PC. Fine for a hobbyist, wrong tool for commercial work in engineering materials.
Verdicts are rule-driven from the spec sheet and current price (€454). They don't capture firmware polish, support quality, or reliability - so treat them as a sanity check, not a final answer.
Live offers
Every live listing on the English-language Amazon marketplaces that I've matched to this printer. Cheapest first. Affiliate links.
- 🇩🇪 Creality Rot K1C 3D-Drucker, 2024, 600mm/s, kein Verstopfung, K1-Upgrade, mit KI-Kamera, 300 °C Druck, Unterstützung von Kohlefaserfilament, für Anfänger, Unternehmen, Bildungsbranche uswAmazon.de · Used€454.30View
Close alternatives - what €454 gets you elsewhere
Think of this like the shopping-cart upsell: here's what a tenner more or less could buy you in roughly the same category. Same FDM tech, same marketplace, all prices live. Stretches are data-driven; they're not sponsored placements.
Save the money, same build volume at 12.1 L. You'd give up: nothing obvious on the spec sheet.
Get: 76.1 L more build volume (88.2 L) · 350°C hot end (was 300°C).
Get: 31.5 L more build volume (43.6 L).
Frequently asked
What materials can the Creality Rot K1C 3D-Drucker print? +
At €454 the Creality Rot K1C 3D-Drucker has the hot end for engineering materials (300°C) but no active chamber, so ABS and nylon will warp on anything larger than a phone case. Treat it as a PLA/PETG/TPU workhorse with headroom for the occasional small ABS part.
How fast is the Creality Rot K1C 3D-Drucker? +
Advertised at 600 mm/s, but that is motion-system capability, not what the hot end can sustain. Expect real-world prints at 80-150 mm/s without quality collapse.
How big can I print on the Creality Rot K1C 3D-Drucker? +
220×220×250 mm (12.1 L). Comfortable for medium props, functional parts up to ~25 cm, and batch printing. One of the most-used working sizes in hobby 3D printing.
Does the Creality Rot K1C 3D-Drucker have auto-levelling? +
Yes - Hands-free leveling auto-levelling probe. Not quite as clean as load-cell or LiDAR, but reliable once calibrated and a world better than manual paper-under-the-nozzle.
Is the Creality Rot K1C 3D-Drucker worth €454? +
€454 is the sweet spot tier. The Creality Rot K1C 3D-Drucker competes directly with the current Bambu A1, Creality K1 and Prusa Mini generation. Hardware-per-pound is tight here - the differentiator is usually software polish and ecosystem.
