Updated 10 September 2026 · Live prices updated daily
Buy on Amazon.com - $228.77 →Affiliate link. Price live from the marketplace, not cached.
At a glance
What this printer gets right and wrong
- ✓ Under $300 - low-risk way to get into 3D printing without regretting the spend.
- ! Open frame - PLA and PETG only, realistically. Forget ABS or nylon done properly.
- ! Manual levelling - plan a weekend of paper-under-the-nozzle rituals before your first clean first layer.
- ! 1.0 L build volume - fine for calibration prints and small parts, awkward for anything bigger than a mug.
Head-to-head spec + price table against the Nilovelygame . Verified printers on this marketplace only.
No auto-levelling means you'll spend your first weekend adjusting screws and fighting first-layer issues. Fine if you want to learn the hard way - frustrating if you just want prints.
Bedslinger with middling flow rate - you already have one of these. The whole point of upgrading is speed, rigidity, or print quality that your current machine can't hit. This doesn't clear that bar.
No active heated chamber or a hot end that tops out below 280°C means no reliable ABS, ASA, nylon or PC. Fine for a hobbyist, wrong tool for commercial work in engineering materials.
Verdicts are rule-driven from the spec sheet and current price ($229). They don't capture firmware polish, support quality, or reliability - so treat them as a sanity check, not a final answer.
Live offers
Every live listing on the English-language Amazon marketplaces that I've matched to this printer. Cheapest first. Affiliate links.
- 🇺🇸 3D Printer, FDM Entry Level Easy Operation Printing Machine Compatible with Easythreed K9 Mini, Support 1.75mm PLA TPU Filament, Practical Desktop Gift 3D Printer(US/Black)Amazon.com · New$228.77View
- 🇺🇸 3D Printer, FDM Entry Level Easy Operation Printing Machine Compatible with Easythreed K9 Mini, Support 1.75mm PLA TPU Filament, Practical Desktop Gift 3D Printer(AU/Black)Amazon.com · New$228.77View
- 🇺🇸 For Easythreed K9 Mini 3D Printer Easy to Use Entry Level Gift 3D Printer FDM TPU PLA Filament 1.75mm Black(US)Amazon.com · New$228.80View
- 🇺🇸 For Easythreed K9 Mini 3D Printer Easy to Use Entry Level Gift 3D Printer FDM TPU PLA Filament 1.75mm Black(AU)Amazon.com · New$228.80View
- 🇺🇸 3D Printer, FDM Entry Level Easy Operation Printing Machine Compatible with Easythreed K9 Mini, Support 1.75mm PLA TPU Filament, Practical Desktop Gift 3D Printer(UK/Black)Amazon.com · New$230.85View
- 🇺🇸 For Easythreed K9 Mini 3D Printer Easy to Use Entry Level Gift 3D Printer FDM TPU PLA Filament 1.75mm Black(UK)Amazon.com · New$230.88View
Close alternatives - what $229 gets you elsewhere
Think of this like the shopping-cart upsell: here's what a tenner more or less could buy you in roughly the same category. Same FDM tech, same marketplace, all prices live. Stretches are data-driven; they're not sponsored placements.
Save the money, same build volume at 10.6 L. You'd give up: nothing obvious on the spec sheet.
Get: 10.6 L more build volume (11.6 L) · 300°C hot end (was —°C).
Get: 16.6 L more build volume (17.6 L) · 300°C hot end (was —°C).
Frequently asked
What materials can the Nilovelygame print? +
At $229 the Nilovelygame realistically prints PLA and TPU. The listed°C hot end is too tight for PETG with confidence and rules out ABS/nylon entirely.
How big can I print on the Nilovelygame ? +
100×100×100 mm (1.0 L). Small build area. Fine for calibration prints, minis, keychains, small functional parts. Awkward for anything bigger than a coffee mug.
Does the Nilovelygame have auto-levelling? +
No - manual levelling only. Plan a weekend tuning the bed with a piece of paper and a hex key before your first clean first layer. At this price in 2026, that is a real drawback.
Is the Nilovelygame worth $229? +
$229 is the sweet spot tier. The Nilovelygame competes directly with the current Bambu A1, Creality K1 and Prusa Mini generation. Hardware-per-pound is tight here - the differentiator is usually software polish and ecosystem.
