Mała Drukarka 3D
Updated 26 September 2026 · Live prices updated daily
Buy on Amazon.pl - zł392.23 →Affiliate link. Price live from the marketplace, not cached.
Specs shown are inferred from the listing, not yet hand-verified.
At a glance
What this printer gets right and wrong
Nothing jumps out on the spec sheet as a standout feature at this price.
- ! Nothing stands out as a clear weakness on the spec sheet - but spec sheets never capture firmware polish, customer support or long-term reliability. Read owner reports before committing.
Head-to-head spec + price table against the AMONIDA Mała Drukarka 3D. Verified printers on this marketplace only.
Sensible first-printer territory: priced where you can afford to get it wrong, with auto-levelling so the first layer isn't a ritual. You'll outgrow it in 18 months, which is fine.
Bedslinger with middling flow rate - you already have one of these. The whole point of upgrading is speed, rigidity, or print quality that your current machine can't hit. This doesn't clear that bar.
No active heated chamber or a hot end that tops out below 280°C means no reliable ABS, ASA, nylon or PC. Fine for a hobbyist, wrong tool for commercial work in engineering materials.
Verdicts are rule-driven from the spec sheet and current price (zł392). They don't capture firmware polish, support quality, or reliability - so treat them as a sanity check, not a final answer.
Live offers
Every live listing on the English-language Amazon marketplaces that I've matched to this printer. Cheapest first. Affiliate links.
- 🇵🇱 AMONIDA Mała Drukarka 3D, Rozmiar Wydruku Mm, prędkość Drukowania 40 Mm/s, z wyjmowaną platformą magnetyczną, dla Początkujących Entuzjastów Rękodzieła w Domu, OS X (BLACK)Amazon.pl · Newzł392.23View
Close alternatives - what $392 gets you elsewhere
Think of this like the shopping-cart upsell: here's what a tenner more or less could buy you in roughly the same category. Same printer tech, same marketplace, all prices live. Stretches are data-driven; they're not sponsored placements.
Get: 16.7 L more build volume (16.7 L).
Modest upgrade on the spec sheet.
Modest upgrade on the spec sheet.
Frequently asked
What materials can the AMONIDA Mała Drukarka 3D print? +
At zł392 the AMONIDA Mała Drukarka 3D realistically prints PLA and TPU. The listed°C hot end is too tight for PETG with confidence and rules out ABS/nylon entirely.
Is the AMONIDA Mała Drukarka 3D worth zł392? +
zł392 is the sweet spot tier. The AMONIDA Mała Drukarka 3D competes directly with the current Bambu A1, Creality K1 and Prusa Mini generation. Hardware-per-pound is tight here - the differentiator is usually software polish and ecosystem.
